Four Seasons 38m2 DIY Auto Solar Pool Heating Kit

This auto solar pool heating kit is ready to be installed and contains all the parts that you would need for a standard installation.  The selection of components is based on 30 years of experience installing solar kits, and they have demonstrated to be the most durable and effective.

Benefits:

• Solar pool heating is free in running costs.
• It uses free energy of the sun to heat the absorber.
• It will work up till 9pm in daylight savings.
• It will double your swimming season, and will provide all year round swimming in the Northern States.

Contains:

• 38m2 of premium black 12 tube pvcn  high gain solar absorber (10 x 25 metre rolls  150mm wide 3.75m2 per roll)
• 1 x 0.75hp pump with hair and lint pot 
• 1 x fsph aquasun digital controller made by dontek electronics (complete with winter mode, hot (roof) and cold (pool ) sensors)
• 1 x 400mm long white pvc pipe class 9, pre-drilled for controller's cold sensor
• 20 x 400mm long black 12 barb luran s header pipes
• 240 x locking sleeves
• 10 x black roofing silicone (adheres to metal or tiled roofs)
• 1 x caulking gun for applying roof silicone
• 1 x spring check valve
• 2 x black end caps
• 1 x black vacuum relief valve
• 1 x black tee
• 4 x black 90 degree elbows
• 14 x white 90 degree elbows
• 2 x white tees (for plumbing into fitration system (not required if you have separate solar provisions)
• 10 x pressure pipe saddles
• 1 x can of silicone spray
• 20 x cable ties
• 1 x packet of spares (5 x long barbs & 5 x locking sleeves)
• installation instructions and diagrams

 Warranty:

• Solar absorber - 15 years pro-rata

Extras:

• You might require extra 12 barb luran s 400mm header pipe with locking sleeves 
• This kit contains the majority of parts required to install your own pool solar hating system. 
• You might require additional pipe (white class 9 pressure) and fittings depending on your pool plumbing.
• 25m, 30m, 40m size rolls are available.
• Measuring your pool will help minimize waste.