Premium Cordless Cleaning for Pools, Spas, and Everyday Touch-Ups
Keep more of your pool area looking ready to enjoy. The Scuba S1 Pro delivers powerful cordless robotic cleaning across the floor, walls, and waterline, while the Pilot X1 gives you quick handheld control for steps, ledges, spas, hot tubs, corners, shallow areas, and smaller debris patches.
Use the Scuba S1 Pro for deep whole-pool cleaning, then keep the Pilot X1 ready for quick clean-ups before a swim, after wind, or whenever debris collects in smaller spaces. It gives you premium robotic cleaning and practical handheld control in one cordless bundle.
Aiper Scuba S1 Pro (2025): Deep-Water Intelligence
The upgraded Scuba S1 Pro (2025) redefines cordless cleaning. Quad brushless motors deliver 379 LPM suction, while WavePath 2.0 navigation and WaveLine 2.0 horizontal waterline cleaning ensure no spot is missed. Dual-layer MicroMesh filtration (180 µm + 3 µm) traps both visible and invisible debris inside a 5 L top-load basket. It climbs walls, handles slopes up to 140°, and self-parks by the wall when finished for an easy lift-out. Learn More
- WavePath 2.0 + WaveLine 2.0 – smarter navigation and refined waterline scrubbing.
- Quad brushless motors – 379 LPM suction power with quiet efficiency.
- Dual MicroMesh (180 µm + 3 µm) – captures particles from dust to fine algae.
- 5 L top-load debris basket – fewer empties, easy rinse and reload.
- Five cleaning modes – Auto, Floor, Wall, Waterline, and Eco Mode.
- 180-minute battery life – recharges in about four hours.
- Aiper App connectivity – view battery, history, modes, and OTA updates (out of water).
Aiper Pilot X1: Quick Cleaning at Your Command
The Aiper Pilot X1 is made for fast, targeted cleaning in the areas that often need extra attention. Lightweight, cordless, and simple to control, it works across steps, shallow ledges, spas, corners, platforms, and pool floors. Switch between shallow-area cleaning from just 0.2 m of water and deeper cleaning down to 2.5 m, with an overall operating depth range of 0.2–3.0 m. Learn More
- Dual-depth cleaning – shallow mode from 0.2 m and deep cleaning up to 2.5 m.
- 4800 LPH suction – strong pickup for leaves, sand, dust and everyday debris.
- 2-stage filtration – 360 μm filter for larger debris and 100 μm ultra-fine filter for sand and dust.
- Flexible swivelling vacuum head – glides around curves, corners, stairs and platforms.
- 45-minute runtime – ideal for quick manual cleaning sessions.
- 1 L drawer-style debris bin – easy, mess-free emptying without filter bags.
- 2.5-hour fast charging – quick turnaround between cleaning sessions.
- Includes telescopic pole and wall mount – practical reach and organised storage.
Why This Bundle?
The Scuba S1 Pro and Pilot X1 cover two different parts of pool care. Scuba S1 Pro handles the premium robotic clean across the main pool area, while Pilot X1 gives you direct control for smaller spaces, shallow areas, and quick debris clean-ups between full cycles.
- Premium Robotic + Spot Cleaning: Deep robotic cleaning for the main pool, handheld vacuuming for detail areas.
- Better Everyday Upkeep: Use Scuba S1 Pro for routine deep cleans and Pilot X1 for steps, corners, spas and shallow ledges.
- Completely Cordless: No cables across the pool area and no connection to the pool filtration system.
- Fine Debris Support: Scuba S1 Pro includes 180 µm + 3 µm MicroMesh filtration, while Pilot X1 adds 360 µm + 100 µm handheld filtration.
- Detail-Area Cleaning: Pilot X1 gives you direct control for steps, ledges, corners, spas, hot tubs and shallow areas.
- Simple Maintenance: Easy-empty filter baskets, quick water release and practical storage accessories.
Technical Specifications
|
Aiper Scuba S1 Pro (2025) |
Aiper Pilot X1 |
| Pool Role |
Premium robotic deep clean: floor, walls and waterline |
Manual spot clean: steps, spas, corners, ledges and shallow areas |
| Ideal Pool Type |
In-ground pools |
In-ground pools, above-ground pools, inflatable pools, spas and hot tubs |
| Coverage |
Up to 200 m² / 20 m length |
Manual cleaning with included telescopic pole |
| Cleaning Area |
Floor, walls and waterline |
Floor, stairs, steps, ledges, corners and shallow/deep areas |
| Navigation / Control |
WavePath 2.0 navigation with Aiper App support |
Manual control with flexible swivelling suction head |
| Water Flow / Suction |
379 LPM |
4800 LPH / 80 LPM |
| Motor System |
Quad brushless motors: 2 × drive motors + 2 × pump motors |
1 × pump motor |
| Filtration |
180 μm fine filter basket + 3 μm ultra-fine MicroMesh filter |
360 μm fine filter + 100 μm ultra-fine filter |
| Filter Capacity |
5 L top-load basket |
1 L drawer-style debris bin |
| Runtime |
Up to 180 minutes |
Up to 45 minutes |
| Charging Time |
Approx. 4 hours |
Approx. 2.5 hours |
| Cleaning Modes |
Auto, Floor, Wall, Waterline, Eco |
Shallow Area Mode and Deep Area Mode |
| Operating Depth |
0.5–3.0 m |
0.2–3.0 m |
| App Control |
Yes |
No |
| Weight |
11.7 kg |
3.3 kg |
In the Box
- 1 × Aiper Scuba S1 Pro (2025 Upgraded), 1 × DC Charger, 1 × Retrieval Hook, 1 × User Manual
- 1 × Aiper Pilot X1, 1 × Telescopic Pole, 1 × Wall-mount Holder, 1 × DC Charger, 1 × User Manual
Frequently Asked Questions
Is this bundle better for regular cleaning or quick clean-ups?
It covers both. The Scuba S1 Pro is for regular robotic cleaning across the floor, walls, and waterline, while the Pilot X1 is for quick handheld clean-ups on steps, shallow ledges, spas, hot tubs, corners, and smaller debris patches between full robotic cycles.
When would I use the Pilot X1 instead of the Scuba S1 Pro?
Use the Pilot X1 when you want direct control over a specific area, such as steps, ledges, platforms, corners, spas, or small debris patches. Its flexible swivelling vacuum head and telescopic pole make it useful for fast touch-ups without running a full robotic cycle.
Can I use the Pilot X1 in a spa or hot tub?
Yes. The Pilot X1 is suitable for spas, hot tubs, inflatable pools, above-ground pools, and inground pools. It can operate in shallow water from 0.2 m, making it useful for smaller spaces where a full robotic cleaning cycle may not be necessary.
Will the Scuba S1 Pro clean the whole pool?
The Scuba S1 Pro cleans the pool floor, walls, and waterline in inground pools. It uses WavePath 2.0 navigation, WaveLine 2.0 horizontal waterline cleaning, caterpillar treads, and up to 180 minutes of cordless runtime to support full-pool cleaning.
Can I control the Scuba S1 Pro from the Aiper App?
Yes. The Scuba S1 Pro can connect to the Aiper App while the cleaner is out of the water. The app allows you to check battery status, view cleaning history, select modes, and apply OTA firmware updates.
Can the Scuba S1 Pro help keep the pool clean between full cycles?
Yes. Eco Mode performs a 45-minute floor clean every 24–48 hours for one week, with three sessions in total. For best results, start Eco Mode with a full charge and avoid removing the cleaner or pressing buttons during standby.
Will this bundle pick up fine dust and sand?
Yes. The Scuba S1 Pro uses a 180 μm fine filter basket and 3 μm MicroMesh filter for larger debris and fine particles. The Pilot X1 adds two-stage handheld filtration, with a 360 μm filter for larger debris and a 100 μm ultra-fine filter for smaller particles such as fine sand and dust.
How long can each cleaner run?
The Scuba S1 Pro runs for up to 180 minutes and charges in about 4 hours. The Pilot X1 runs for up to 45 minutes and charges in about 2.5 hours.
Can I leave the pool pump running while the Scuba S1 Pro cleans?
No. For best results, turn off the pool pump while the Scuba S1 Pro is cleaning. Running the pump can affect the cleaner’s movement, suction, and navigation.
How often should I empty the filters?
Empty and rinse the Scuba S1 Pro’s 5 L top-load basket and MicroMesh filters after use, especially after heavy debris loads. For the Pilot X1, slide out the 1 L debris bin, rinse the filter components, and make sure the bin clicks securely back into place before use.
Why has the Scuba S1 Pro stopped early or lost suction?
Check whether the filter basket or MicroMesh filter is clogged, the inlet cover is blocked, or debris is caught around the roller brushes or impeller. Also make sure the cleaner is fully charged before starting a full cycle or Eco Mode.
Why does the Pilot X1 suction feel weak?
Check that the debris bin is fully clicked into place and that the filters are not clogged. Rinse the 360 μm and 100 μm filter layers thoroughly, then reinstall them before use. Low battery can also reduce cleaning performance, so recharge if needed.
How should I store the cleaners after use?
Rinse and dry both cleaners before storage. Keep the Scuba S1 Pro indoors or in a protected dry area when not in use. The Pilot X1 includes a wall-mount holder, making it easy to store neatly with the pole and accessories between quick clean-ups.
Note!
Differences between Product Illustrations and Actual Products: The product illustrations, including product pictures, images and display contents, displayed on the website are for reference only. Actual products may vary slightly in appearance, colour, logo, dimension or size due to production batches, improvements and regional requirements. Please refer to the actual product received. The final interpretation of product specifications and appearance belongs to Aiper.
