The Ultimate Cordless Pool-Care Duo – Powered by Solar and Smart Navigation
Start every day with a crystal-clear pool. The Aiper Scuba S1 Pro (2025 Upgraded) teams up with the Surfer S2 solar skimmer to keep water pristine from surface to floor – quietly, efficiently, and without cords. Surfer S2 skims nonstop with solar top-ups, catching leaves and pollen before they sink, while Scuba S1 Pro dives deeper to scrub floors, walls, and the waterline with WavePath 2.0 precision. Together, they deliver resort-level clarity with minimal effort.
Aiper Scuba S1 Pro (2025): Deep-Water Intelligence
The upgraded Scuba S1 Pro (2025) redefines cordless cleaning. Quad brushless motors deliver 379 LPM suction, while WavePath 2.0 navigation and WaveLine 2.0 horizontal waterline cleaning ensure no spot is missed. Dual-layer MicroMesh filtration (180 µm + 3 µm) traps both visible and invisible debris inside a 5 L top-load basket. It climbs walls, handles slopes up to 140°, and self-parks by the wall when finished for an easy lift-out. Learn More
- WavePath 2.0 + WaveLine 2.0 – smarter navigation and refined waterline scrubbing.
- Quad brushless motors – 379 LPM suction power with quiet efficiency.
- Dual MicroMesh (180 µm + 3 µm) – captures particles from dust to fine algae.
- 5 L top-load debris basket – fewer empties, easy rinse and reload.
- Five cleaning modes – Auto, Floor, Wall, Waterline, and Eco Mode.
- 180-minute battery life – recharges in about four hours.
- Aiper App connectivity – view battery, history, modes, and OTA updates (out of water).
Aiper Surfer S2: Solar Skimming That Doesn’t Clock Off
Surfer S2 keeps the surface crystal clear around the clock. With SolarSeeker technology, it repositions itself into sunlight for recharging and resumes cleaning automatically. A full DC charge provides up to 35 hours of runtime – perfect for cloudy stretches. The 150 µm fine filter and wide 22.7 cm inlet pull in everything from pollen and dust to twigs and gum nuts. Dual dToF optical sensors detect obstacles early, while DebrisGuard prevents collected debris from leaking back out. With its built-in chlorine dispenser and app control, surface maintenance has never been easier. Learn More
- 24/7 solar operation with SolarSeeker and up to 35-hour DC runtime.
- 150 µm filtration + 22.7 cm inlet – captures fine dust, insects, and large debris.
- DebrisGuard leak-proof baffle – keeps captured debris securely sealed.
- Built-in chlorine dispenser – accepts Ø76 × 25 mm tablets with adjustable flow.
- dToF optical obstacle avoidance – smoother navigation and fewer stalls.
- Aiper App control – start, stop, steer, and schedule clean-ups remotely.
- 4 L side-drawer debris basket – easy emptying, less mess.
Why This Bundle?
Surface debris is captured before it sinks. Fine particles are removed before they cloud the water. The Surfer S2 lightens the Scuba S1 Pro’s workload, while the S1 Pro keeps the floor, walls, and waterline spotless. Together they maintain pool clarity effortlessly – leaving you with more time to enjoy your space, not clean it.
- Complete Coverage: Cleans from surface to floor with seamless coordination.
- Time-Saving Convenience: Automated skimming and scheduled deep cleaning reduce manual effort.
- Eco-Smart Efficiency: Solar power meets brushless energy-saving technology.
- Quiet & Cordless: No tangles, no noise – just clarity and calm.
- Built to Last: UV-resistant, salt-compatible, and serviceable with replaceable parts.
Technical Specifications
|
Aiper Scuba S1 Pro (2025) |
Aiper Surfer S2 |
| Pool Role |
Deep clean: floor, walls, waterline |
Continuous surface skimming |
| Coverage |
Up to 200 m² |
Any surface area (surface only) |
| Motors |
Quad brushless (2× drive, 2× pump) |
3 brushless (2× propeller, 1× impeller) |
| Flow / Suction |
379 LPM |
High-efficiency surface suction |
| Filtration |
180 µm basket + 3 µm MicroMesh |
150 µm fine filter |
| Basket Capacity |
5 L (top-load) |
4 L (side drawer, DebrisGuard) |
| Navigation / Sensing |
WavePath™ 2.0 + WaveLine™ 2.0; IR sensors |
dToF optical sensors; self-rescue & anti-stranding |
| Runtime |
Up to 180 min |
24/7 solar top-ups; up to 35 hrs DC |
| Recharge Time |
4 hrs |
4.5 hrs (DC) |
| App Connectivity |
Battery, history, modes, OTA (out of water) |
Start/stop, steer, schedules, alerts |
| Compatibility |
In-ground pools, most surfaces |
Most pool shapes; not for infinity/zero-edge |
In the Box
- 1 x Aiper Scuba S1 Pro (2025 Upgraded), 1 x DC Charger, 1 x Retrieval Hook, 1 x User Manual
- 1 × Aiper Surfer S2, 1 × DC Charger, 1 × User Manual, 1 × Foam Noodle, 1 × Quick Start Guide
Frequently Asked Questions
Can I run Scuba S1 Pro and Surfer S2 at the same time?
Yes. Scuba S1 Pro deep-cleans below the waterline while Surfer S2 skims above. Both are cordless and independent, so they won’t interfere with each other.
How does Surfer S2 support Scuba S1 Pro’s cleaning?
By catching leaves, pollen, and insects before they sink, Surfer S2 reduces the load on Scuba S1 Pro and keeps your water clearer between deep cleans.
What are the runtimes and charging times?
Scuba S1 Pro operates up to 180 minutes on a 4-hour charge. Surfer S2 can skim continuously with solar top-ups and delivers up to 35 hours from a full DC charge (4.5 hours recharge).
Which pools are suitable for this bundle?
Scuba S1 Pro: in-ground pools up to 200 m² across common finishes (concrete, Pebblecrete, fiberglass, vinyl, tiles). Surfer S2: most pool shapes, including those with attached spas or loungers. Not suitable for infinity or zero-edge pools.
How does Scuba S1 Pro handle walls and the waterline?
Caterpillar treads enable vertical climbing, while WaveLine 2.0 cleans horizontally along the waterline to remove residue and oils.
How does Surfer S2 avoid obstacles or getting stuck?
Two dToF optical sensors detect walls, ladders, and corners early and adjust course. A self-rescue algorithm and adjustable anti-stranding columns help it move away from steps or shallow shelves.
What happens if the Surfer S2 gets stuck?
A self-rescue algorithm and adjustable anti-stranding columns help it free itself. You can also steer it via the app. If it catches at the pool’s built-in skimmer, place the included foam noodle at the skimmer mouth and reduce that suction while the S2 is running. Avoid running other cleaners at the same time.
Tips to Prevent Your Skimmer Robot from Getting Stuck with a Fixed Skimmer Entrance
- Foam noodle included.
- Location: box or filter basket.
- Remove if in basket → avoid roller brush jam.
- Place in skimmer port → avoid getting stuck.
How should I maintain them?
After each use, empty and rinse the Surfer S2’s 4 L basket and 150 µm filter. For Scuba S1 Pro, rinse the 5 L basket and MicroMesh filters thoroughly. Allow both units to dry before storage.
Quick troubleshooting tips
Surfer S2: If it reverses or spins, clean lenses, propellers, and basket.
Scuba S1 Pro: If suction drops, clean filters and impeller.
Note!
Differences between Product Illustrations and Actual Products: The product illustrations (including product pictures, images and display contents) displayed on the website are for reference only. Actual products may vary slightly in appearance, colour, logo, dimension, or size due to production batches, improvements, and regional requirements. Please refer to the actual product received. The final interpretation of product specifications and appearance belongs to Aiper.
