The Ultimate Cordless Pool-Care Duo – High-Flow Deep Clean + Solar Skimming
Start every day with a crystal-clear pool. The Aiper Scuba X1 teams up with the Surfer S2 solar skimmer to keep water pristine from surface to floor – quietly, efficiently, and without cords. Surfer S2 skims nonstop with solar top-ups, catching leaves and pollen before they sink, while Scuba X1 powers through floors, walls, and the waterline with dual-jet suction and WavePath 3.0 precision. Together, they deliver resort-level clarity with minimal effort.
Aiper Scuba X1: Dual-Jet Muscle with Smart Coverage
Scuba X1 channels 25,200 LPH through twin jets, combining four brushless motors with WavePath 3.0 navigation and WaveLine 2.0 waterline scrubbing. A dual-stage filtration system (180 µm + 3 µm) traps everything from leaves to fine dust in a 5 L top-load basket. It climbs walls, parks at the waterline for easy retrieval, and recharges on a wireless dock. Learn More
- High-flow dual jets – sustained 25,200 LPH for strong pickup at depth.
- WavePath 3.0 + WaveLine 2.0 – cross-pattern floors, N-pattern walls, horizontal waterline scrubbing.
- Dual-stage filtration (180 µm + 3 µm) – from leaves to fine dust and algae.
- 5 L top-load basket – fewer empties, quick rinse and reload.
- Up to 180-minute runtime – cleans pools up to 200 m² / 70,000 L.
- Wireless charging dock – dock-and-go convenience.
- Aiper App – schedule, track progress, view history; HydroComm optional for underwater control.
Aiper Surfer S2: Solar Skimming That Doesn’t Clock Off
Surfer S2 keeps the surface crystal clear around the clock. With SolarSeeker technology, it repositions itself into sunlight for recharging and resumes cleaning automatically. A full DC charge provides up to 35 hours of runtime – perfect for cloudy stretches. The 150 µm fine filter and wide 22.7 cm inlet pull in everything from pollen and dust to twigs and gum nuts. Dual dToF optical sensors detect obstacles early, while DebrisGuard prevents collected debris from leaking back out. With its built-in chlorine dispenser and app control, surface maintenance has never been easier. Learn More
- 24/7 solar operation with SolarSeeker and up to 35-hour DC runtime.
- 150 µm filtration + 22.7 cm inlet – captures fine dust, insects, and large debris.
- DebrisGuard leak-proof baffle – keeps captured debris securely sealed.
- Built-in chlorine dispenser – accepts Ø76 × 25 mm tablets with adjustable flow.
- dToF optical obstacle avoidance – smoother navigation and fewer stalls.
- Aiper App control – start, stop, steer, and schedule clean-ups remotely.
- 4 L side-drawer debris basket – easy emptying, less mess.
Why This Bundle?
Surface debris is captured before it sinks. Fine particles are removed before they cloud the water. The Surfer S2 lightens the Scuba X1’s workload, while the X1 keeps the floor, walls, and waterline spotless. Together they maintain pool clarity effortlessly – leaving you with more time to enjoy your space, not clean it.
- Complete Coverage: Cleans from surface to floor with seamless coordination.
- Time-Saving Convenience: Automated skimming and scheduled deep cleaning reduce manual effort.
- Eco-Smart Efficiency: Solar power meets brushless energy-saving technology.
- Quiet & Cordless: No tangles, no noise – just clarity and calm.
- Built to Last: UV-resistant, salt-compatible, and serviceable with replaceable parts.
Technical Specifications
|
Aiper Scuba X1 |
Aiper Surfer S2 |
| Pool Role |
Deep clean: floor, walls, waterline |
Continuous surface skimming |
| Coverage |
Up to 200 m² / 70,000 L |
Any surface area (surface only) |
| Motors |
4 brushless (dual-jet system) |
3 brushless (2× propeller, 1× impeller) |
| Flow / Suction |
420 LPM |
High-efficiency surface suction |
| Filtration |
180 µm basket + 3 µm MicroMesh |
150 µm fine filter |
| Basket Capacity |
5 L (top-load) |
4 L (side drawer, DebrisGuard) |
| Navigation / Sensing |
WavePath™ 3.0 + WaveLine™ 2.0; ultrasonic sensors |
dToF optical sensors; self-rescue & anti-stranding |
| Runtime |
Up to 180 min |
24/7 solar top-ups; up to 35 hrs DC |
| Recharge Time |
4 hrs (wireless dock) |
4.5 hrs (DC) |
| App Connectivity |
Schedule, progress, history; optional HydroComm for underwater control |
Start/stop, steer, schedules, alerts |
| Compatibility |
In-ground pools, most surfaces |
Most pool shapes; not for infinity/zero-edge |
In the Box
- 1 × Aiper Scuba X1, 1 × Wireless Charging Dock, 1 × DC Charger, 1 × Retrieval Hook, 1 × User Manual
- 1 × Aiper Surfer S2, 1 × DC Charger, 1 × User Manual, 1 × Foam Noodle, 1 × Quick Start Guide
Frequently Asked Questions
Can I run Scuba X1 and Surfer S2 at the same time?
Yes. Scuba X1 deep-cleans below the waterline while Surfer S2 skims above. Both are cordless and independent, so they won’t interfere with each other.
How does Surfer S2 support Scuba X1’s cleaning?
By catching leaves, pollen, and insects before they sink, Surfer S2 reduces the load on Scuba X1 and keeps your water clearer between deep cleans.
What are the runtimes and charging times?
Scuba X1 operates up to 180 minutes per charge and recharges on its wireless dock in ~4.5 hours. Surfer S2 can skim continuously with solar top-ups and delivers up to 35 hours from a full DC charge (~4.5 hours recharge).
Which pools are suitable for this bundle?
Scuba X1: in-ground pools up to 200 m² / 70,000 L across common finishes (concrete, Pebblecrete, fiberglass, vinyl, tiles). Surfer S2: most pool shapes, including those with attached spas or loungers. Not suitable for infinity or zero-edge pools.
How does Scuba X1 handle walls and the waterline?
WaveLine 2.0 cleans horizontally along the waterline, while WavePath 3.0 uses cross-pattern and N-pattern passes for complete floor and wall coverage.
How does Surfer S2 avoid obstacles or getting stuck?
Two dToF optical sensors detect walls, ladders, and corners early and adjust course. A self-rescue algorithm and adjustable anti-stranding columns help it move away from steps or shallow shelves.
What happens if the Surfer S2 gets stuck?
A self-rescue algorithm and adjustable anti-stranding columns help it free itself. You can also steer it via the app. If it catches at the pool’s built-in skimmer, place the included foam noodle at the skimmer mouth and reduce that suction while the S2 is running. Avoid running other cleaners at the same time.
Tips to Prevent Your Skimmer Robot from Getting Stuck with a Fixed Skimmer Entrance
- Foam noodle included.
- Location: box or filter basket.
- Remove if in basket → avoid roller brush jam.
- Place in skimmer port → avoid getting stuck.
How should I maintain them?
After each use, empty and rinse the Surfer S2’s 4 L basket and 150 µm filter. For Scuba X1, rinse the 5 L basket and MicroMesh insert thoroughly. Allow both units to dry before storage.
Quick troubleshooting tips
Surfer S2: If it reverses or spins, clean lenses, propellers, and basket.
Scuba X1: If suction drops, clean filters and check the impeller area.
Note!
Differences between Product Illustrations and Actual Products: The product illustrations (including product pictures, images and display contents) displayed on the website are for reference only. Actual products may vary slightly in appearance, colour, logo, dimension, or size due to production batches, improvements, and regional requirements. Please refer to the actual product received. The final interpretation of product specifications and appearance belongs to Aiper.
