Advanced Cordless Cleaning from Surface to Floor
Keep more of your pool looking clean, clear, and ready to enjoy. The Scuba X1 Pro delivers advanced robotic cleaning across the floor, walls, waterline, and elevated platform areas, while the Surfer S2 keeps the surface clear with solar-powered skimming throughout the day.
Aiper Scuba X1 Pro: Advanced Mapping, Maximum Cleaning
The Aiper Scuba X1 Pro brings smarter robotic cleaning to more areas of the pool. With intelligent mapping, adaptive suction, platform cleaning, fine-debris filtration, easy waterline parking, and wireless dock charging, it helps manage regular pool cleaning with less manual effort and more confident coverage. Learn More
- OmniSense+ 360° Mapping – ultrasonic sensing scans and maps the pool for smarter route planning.
- FlexiPath Smart Navigation – adaptive floor and wall paths for efficient, edge-to-edge coverage.
- Platform & Multi-Level Cleaning – supports steps, ledges, gentle slopes, and elevated platform areas.
- Intelligent Suction Adjustment – turbidity-based power adjustment helps match cleaning strength to water conditions.
- WaveLine 2.0 Waterline Scrubbing – horizontal waterline cleaning for a cleaner, more polished finish.
- 25,200 LPH Dual-Jet Suction – strong flow for fine sand, small debris, leaves, and algae.
- Dual-stage filtration (180 µm + 3 µm) – captures larger debris and ultra-fine particles.
- Wireless charging dock – simple dock-and-go charging and storage.
Aiper Surfer S2: Solar Skimming That Doesn’t Clock Off
Surfer S2 keeps the surface crystal clear around the clock. With SolarSeeker technology, it repositions itself into sunlight for recharging and resumes cleaning automatically. A full DC charge provides up to 35 hours of runtime – perfect for cloudy stretches. The 150 µm fine filter and wide 22.7 cm inlet pull in everything from pollen and dust to twigs and gum nuts. Dual dToF optical sensors detect obstacles early, while DebrisGuard prevents collected debris from leaking back out. With its built-in chlorine dispenser and app control, surface maintenance has never been easier. Learn More
- 24/7 solar operation with SolarSeeker and up to 35-hour DC runtime.
- 150 µm filtration + 22.7 cm inlet – captures fine dust, insects, and large debris.
- DebrisGuard leak-proof baffle – keeps captured debris securely sealed.
- Built-in chlorine dispenser – accepts Ø76 × 25 mm tablets with adjustable flow.
- dToF optical obstacle avoidance – smoother navigation and fewer stalls.
- Aiper App control – start, stop, steer, and schedule clean-ups remotely.
- 4 L side-drawer debris basket – easy emptying, less mess.
Why This Bundle?
The Scuba X1 Pro and Surfer S2 cover two different levels of pool cleaning. Surfer S2 collects floating debris before it sinks, while Scuba X1 Pro handles the advanced robotic clean below the surface across the floor, walls, waterline, and elevated platform areas.
- Surface + Deep Cleaning: Solar skimming above the water, advanced robotic cleaning below the surface.
- Better Everyday Upkeep: Helps reduce surface debris before it settles on the pool floor.
- Advanced Pool Coverage: Scuba X1 Pro supports floors, walls, waterline, ledges, gentle slopes, and platform areas.
- Completely Cordless: No cables across the pool area and no connection to the pool filtration system.
- Fine Debris Support: Scuba X1 Pro includes 180 µm + 3 µm MicroMesh filtration, while Surfer S2 uses 150 µm surface filtration.
- Simple Maintenance: Easy-empty baskets, solar top-ups, app control, and wireless dock charging.
Technical Specifications
|
Aiper Scuba X1 Pro |
Aiper Surfer S2 |
| Pool Role |
Advanced robotic deep clean: floor, walls, waterline and elevated platforms |
Continuous surface skimming |
| Ideal Pool Type |
In-ground pools |
Most pool shapes with a boundary; not suitable for infinity/zero-edge pools |
| Coverage |
Up to 200 m² / 20 m length |
Surface cleaning |
| Cleaning Area |
Floor, walls, waterline, elevated platforms and slopes |
Water surface |
| Navigation / Sensing |
OmniSense+ 360° mapping with FlexiPath navigation |
dToF optical sensors with self-rescue and anti-stranding support |
| Water Flow / Suction |
25,200 LPH |
High-efficiency surface suction |
| Motor System |
4 motor system with dual-jet suction |
3 brushless motors: 2 × propeller + 1 × impeller |
| Filtration |
180 μm fine filter basket + 3 μm ultra-fine MicroMesh filter |
150 μm fine filter basket |
| Filter Capacity |
5 L top-load basket |
4 L side-drawer debris basket |
| Runtime |
Up to 180 minutes |
24/7 solar top-ups; up to 35 hours DC runtime |
| Charging Time |
Approx. 5 hours |
Approx. 4.5 hours by DC charger |
| Cleaning Modes |
Standard, Floor, Wall, Waterline, Scheduled + Eco/Auto/Max power adjustments |
Automatic Cleaning Mode / App Remote Mode |
| Operating Depth |
0.5–3.0 m |
Surface operation |
| App Control |
Yes; HydroComm optional for underwater communication and smart retrieval |
Yes; start/stop, remote steering, schedules and status alerts |
| Charging / Power |
Wireless charging dock |
Solar charging panel + DC charger |
| Weight |
11 kg |
5.7 kg |
In the Box
- 1 × Aiper Scuba X1 Pro, 1 × Wireless Charging Dock, 1 × DC Charger, 1 × Retrieval Hook, 1 × Extra 3 μm Ultra-Fine MicroMesh Filter, 1 × User Manual
- 1 × Aiper Surfer S2, 1 × DC Charger, 1 × User Manual, 1 × Foam Noodle, 1 × Quick Start Guide
Frequently Asked Questions
How does Surfer S2 help reduce debris on the pool?
Surfer S2 skims the water surface and collects floating leaves, insects, pollen, dust, and light debris before they settle on the pool floor. This helps keep the surface clearer and can reduce the amount of debris Scuba X1 Pro needs to collect during its robotic cleaning cycle.
Can I run Surfer S2 while Scuba X1 Pro is cleaning?
Yes. Surfer S2 works on the water surface while Scuba X1 Pro cleans below the surface, so they can be used in the same pool. For best results, turn off the pool pump while the Scuba X1 Pro is operating, as strong water movement can affect navigation and cleaning performance.
Will the Scuba X1 Pro clean steps, ledges, or shallow platforms?
Scuba X1 Pro includes platform and multi-level cleaning support. Its depth and downward-facing sensors help it recognise ledges, gentle slopes, beach-entry areas, and elevated platforms while helping reduce the risk of falling from drop-offs. Very narrow or very shallow areas may still require manual cleaning.
How does Scuba X1 Pro map and clean the pool?
Scuba X1 Pro uses OmniSense+ ultrasonic sensing to scan the pool and plan more efficient cleaning paths. This helps it adapt to different pool shapes and improve coverage across floors, walls, the waterline, and platform areas.
Can I control both cleaners from the Aiper App?
Yes. Surfer S2 supports app start/stop, remote steering, schedules, battery status, cleaning history, and alerts. Scuba X1 Pro supports app monitoring, mode selection, cleaning history, key-component alerts, and OTA updates. Underwater communication and smart retrieval for Scuba X1 Pro require the optional HydroComm Pro or HydroComm Pure.
What should I use for fine dust, pollen, or cloudy-looking debris?
For fine debris below the surface, use the Scuba X1 Pro with its 3 μm MicroMesh ultra-fine filter. For floating dust, pollen, insects, and surface debris, Surfer S2 uses 150 μm surface filtration to help keep the top of the water clearer.
How long can each cleaner run?
Scuba X1 Pro runs for up to 180 minutes and charges in about 5 hours on the wireless dock. Surfer S2 can keep skimming with solar top-ups and provides up to 35 hours from a full DC charge.
Can the Surfer S2 stay in the pool every day?
Yes. Surfer S2 is made for ongoing surface skimming with solar top-ups. Empty and rinse the basket regularly, keep the solar panel and sensors clean, and check the filter basket often during heavy leaf periods.
Do I still need to empty the baskets often?
Yes. Empty the Surfer S2’s 4 L basket regularly so surface debris does not build up. After Scuba X1 Pro cleaning cycles, rinse the 5 L basket and MicroMesh filter, especially after windy weather, heavy leaves, or fine dust loads.
Why is the Scuba X1 Pro not picking up as strongly as usual?
Check whether the 5 L basket or MicroMesh filter is clogged, then inspect the impeller or propeller area for debris. A full filter, blocked inlet, or low battery can reduce suction and cleaning performance.
Why does the Surfer S2 keep reversing, spinning, or getting stuck?
Clean the optical sensor lenses, check the propellers and impeller for debris, and confirm the anti-stranding columns are adjusted correctly. If it catches near a fixed skimmer entrance, place the included foam noodle at the skimmer mouth and reduce that suction while the S2 is running.
How should I look after both cleaners?
Rinse and dry both cleaners before storage. Keep the Scuba X1 Pro basket and MicroMesh filters clean, and keep the Surfer S2’s solar panel, sensors, filter basket, and debris drawer clear for reliable surface skimming.
Note!
Differences between Product Illustrations and Actual Products: The product illustrations, including product pictures, images and display contents, displayed on the website are for reference only. Actual products may vary slightly in appearance, colour, logo, dimension or size due to production batches, improvements and regional requirements. Please refer to the actual product received. The final interpretation of product specifications and appearance belongs to Aiper.
