"The New Generation of Suction Cleaners"
Hayward PoolVac V-Flex automatic suction pool cleaner delivers more power, reliability and performance than ever. Equipped with patented V-Flex variable vane turbine technology, PoolVac V-Flex can pick up larger dirt and debris more effectively than any other cleaner on the market for peace of mind of clog-free cleaning. It maximizes suction power even at lower flow-making it the perfect partner for use with variable speed pumps.
Its unmatched patented AquaPilot programmed steering determines the most efficient cleaning path around any pool and assists with cleaner maneuverability for the most reliable, complete pool coverage.
Benefits:
- Patented V-Flex technology features, a flexible blade turbine that optimises pool cleaning and captures larger debris
- The exclusive AquaPilot steering system provides an optimised cleaning path to ensure complete pool coverage
- Unique hydrodynamic design allows the cleaner unhindered inpool movement
- Tool-free installation
- Ideal for use with a variable-speed pump: the cleaner operates at low speed to preserve the energy savings made by the variable-speed pump
- Ready to use in less than 10 minutes
Highlights:
- Clog-Free Cleaning: Patented V-Flex technology ensures efficient debris collection without clogs.
- Energy Efficient: Maximizes suction power at lower flow rates, perfect for variable speed pumps.
- Comprehensive Coverage: AquaPilot programmed steering ensures the cleaner covers the entire pool, including floors, walls*, and coves.
- Easy Installation and Maintenance: Simple tool-free installation and minimal upkeep.
- Quiet Operation: Advanced suction design ensures a quiet cleaning process.
Complete Cleaning
Their exclusive steering system allows them to move quickly and methodically to clean the pool efficiently in an average time of between two and three hours.
Simple
Can be directly connected to the vacuum fitting or skimmer. They operate with the filter pump without the use of tools or an electrical connection.
Unique design
Virtually eliminates clogs without sacrificing energy efficiency.
Features:
- Patented V-Flex Variable Vane Turbine Technology: Self-adjusting vanes handle larger debris effortlessly.
- Energy-Efficient Design: Delivers maximum suction power at lower flow, enhancing compatibility with variable-speed pumps.
- AquaPilot Technology: Provides optimized cleaning paths for complete pool coverage.
- Wide Vacuum Inlet and Unique Wing Design: Ensures constant suction power and faster debris pickup.
- Easy to Use and Install: Connects to a skimmer or suction port in less than 10 minutes, no tools required.
- Powered by Existing Filtration System: No need for a booster pump.
- Hydro-Dynamic Head Design: Turbine-drive system for smooth, silent operation.
- High-Flow Hose: Reduces hydraulic friction for efficient operation.
- Adaptive Steering Assembly: Prevents hose tangles and enhances maneuverability.
- Advanced Pod Propulsion: Eliminates the need for wheels and belts, ensuring consistent performance and longevity.
Specifications:
- Pool Coverage:* Floor, walls, coves
- Hose Length: 12m
- Pool Size: Up to 6m x 12m
- Pool Surface:** Gunite, vinyl, fiberglass, pebble, tile
- Turbine Type: Patented V-Flex variable vane technology
- Drive Sequence: AquaPilot programmed steering system
- Traction System: Pod and shoes
* Wall climbing capability and pool coverage may be affected by specific pool shapes and surfaces. The cleaner may not climb the wall under certain conditions.
** Different shoe types available for different pool surfaces.
In The Box:Â
- Hoses 1+11:
1. Principal 1m (VVX101BBP)
2. Following 1m (VVX101BBF)
Frequently Asked Questions
Why isn't my PoolVac V-Flex moving or showing slow forward movement?
Insufficient water flow is the most common cause. Check the flow gauge, clear any blockages, and ensure shoes and wings are not worn. If proper flow cannot be achieved, the issue is likely within the pool's circulation system rather than the cleaner.
Why does the cleaner fail to climb the walls or stay on the floor?
Low water flow, worn shoes, or the wrong shoe type can prevent climbing. Check the flow gauge, inspect the cleaner throat, confirm correct shoe type for your pool surface, and ensure the hose is long enough. Adjusting the rear flap may also be required.
Why does the PoolVac V-Flex climb too high and suck air at the surface?
This indicates excessive suction. Reduce suction using the regulator valve or suction valves and set the rear flap adjuster to Position I. Correcting the flow will prevent the cleaner from rising too far up the wall.
Why does the cleaner get stuck on steps, corners, or obstacles?
If the cleaner spends too long in one area, adjust the rear flap to Position I. Confirm the flow reading is correct and ensure return jets are not directing water toward the cleaner.
What should I do if the cleaner head "floats" or lifts off the pool floor?
Air in the system or return jet interference is usually the cause. Fully submerge the cleaner and hose to remove air, and angle return jets downward. Ensure shoes and wings are in good condition and the hose length is correct.
How do I know if my water flow setting is too high or too low?
Use the supplied flow gauge. The black disk must sit between MIN and MAX. The regulator valve can reduce suction but cannot increase flow if the system is underpowered. Low readings usually indicate a filtration or circulation issue.
Can the PoolVac V-Flex be used with variable speed pumps?
Yes. The V-Flex turbine maintains strong suction at lower flow rates. Run the pump at a speed that achieves the correct flow gauge reading to balance performance and energy savings.
What do I do if the flow gauge reading is too high or too low?
If too high, reduce suction using the regulator valve or suction valves. If too low, check the filter, skimmer basket, pump basket, and lines for blockages. The regulator valve cannot increase flow.
How often should I check or replace shoes, wings, and flaps?
Inspect these wear items regularly. Shoes have a visible wear line showing when replacement is due. Worn parts affect traction and steering, so replacing them promptly maintains performance.
How do I prevent hose tangling or hose-related movement issues?
Ensure the hose length matches the pool size (pool length plus two sections) and always store hoses straight, never coiled. Coiled storage creates hose memory, which affects movement and is not covered under warranty.
Is wall climbing guaranteed for all pool shapes and surfaces?
No. The pool must have a minimum 180mm radius where the floor meets the wall. Certain shapes, steep transitions, or surface types may limit climbing. Correct shoes, adequate flow, and flap adjustment are still required.
What should I do if the cleaner stops due to debris blockage?
Turn off the pump and inspect the intake throat, turbine area, and rear screen. Remove any debris and confirm the flow gauge reading is correct before returning the cleaner to the pool.
Why is my cleaner not steering correctly or missing areas of the pool?
Steering issues can be caused by worn wings or shoes, blockages in the turbine area, or low water flow. Clean the rear screen, check that the cone gear rotates freely, and inspect the steering components.
Do I need the regulator valve, and how do I adjust it?
You need the regulator valve if suction is too strong. Insert it into the skimmer cone and adjust the blue collar until the flow gauge is within range. It reduces flow only; it cannot increase weak flow.
