Powerful, Large Volume Rechargeable Pool Vacuum with 43cm extra-wide body for large amounts of leaves and fine debris.
The Kokido Telsa 90 Rechargeable Pool and Spa Vacuum Cleaner is designed for powerful, efficient cleaning of all pool sizes. Equipped with a rechargeable lithium-ion battery, this cordless vacuum delivers up to 75 minutes of continuous cleaning on a single charge. Ideal for removing large debris, leaves, and fine particles, the Telsa 90 comes with two filter bags – a standard mesh bag (250 μm) for larger debris and a fine mesh filter bag (125 μm) for sand and sediment.
The vacuum's removable side extensions allow you to increase the suction surface from 21 cm to 43 cm, making it perfect for covering wider areas in less time. Featuring a magnetic waterproof switch and auto ON/OFF operation with water sensors, the Telsa 90 makes pool maintenance simple and intuitive.
The LED indicator keeps you informed, showing when the vacuum is ready to use, in operation, clogged, or needs to be charged. With a large debris capacity and removable side extensions, this versatile vacuum is perfect for cleaning narrow areas and slatted pool cover compartments. Plus, its built-in safety mechanism automatically stops the blades when clogging occurs, providing peace of mind during use.
Benefits
- Cordless Efficiency. With a rechargeable lithium-ion battery providing up to 75 minutes of runtime, cleaning is hassle-free and cord-free.
- Versatile Cleaning. Comes with two filter bags – standard (250 μm) for large debris like leaves and fine mesh (125 μm) for smaller particles like sand and dust.
- Increased Coverage. Removable extensions expand the suction area from 21 cm to 43 cm, allowing for faster cleaning over larger areas and ease of access in tighter spaces.
- User-Friendly Operation. The auto ON/OFF feature, activated by water sensors, along with an LED indicator, makes operation intuitive and easy to monitor.
- Safety First. A built-in safety mechanism stops operation in case of clogging, protecting both the device and pool from damage.
- Extendable Reach. Compatible with standard telescopic poles (sold separately) for greater reach during cleaning.
Features
- 75-Minute Runtime. Powered by a 4000 mAh lithium-ion battery, providing extended cleaning without the need for frequent recharging.
- Dual Filter Bags. Includes standard filter (250 μm) for large debris and fine filter (125 μm) for fine sediment, making it effective for a variety of cleaning needs.
- Removable Side Extensions. Increase the vacuum’s suction surface from 21 cm to 43 cm for efficient cleaning of large areas and narrow spaces.
- LED Indicator. Informs users when the vacuum is ready for use, in operation, clogged, or needs recharging.
- Magnetic Waterproof Switch. Ensures safe, reliable operation by keeping the vacuum sealed, while auto ON/OFF activates when submerged.
- Safety Mechanism. Automatically halts operation if clogging occurs, protecting the motor and blades.
- Submersible Design. Fully submersible body allows the vacuum to function at depths of up to 2.75 meters.
With the Kokido Telsa 90, cleaning your pool is no longer a chore, but a quick and easy task. Spend less time maintaining your pool and more time enjoying family fun in crystal-clear water!
Technical Specifications
| Max Pool Depth |
2.75 meters |
| Power |
600 watts |
| Suction Flow Rate |
90-100 |
| Running Time |
75 minutes |
| Charging Time |
5-6 hours |
| Voltage |
11.1V |
| Battery Type |
Lithium-ion, 4000 mAh |
| Suction Surface |
21 cm to 43 cm (with removable extensions) |
| Filter Types |
Standard (250 μm) and Fine (125 μm) mesh filter bags |
In The Box
- 1 x Pool vacuum cleaner
- 2 x Removable extensionÂ
- 1 x Standard filter bags (250 μm)
- 1 x Fine filter bag (125 μm)
- 1 x Battery charger
Frequently Asked Questions
Why won’t my Telsa 90 start when submerged in the pool?
Ensure the unit is fully immersed so the water sensors can activate. If it still does not start, check the switching knob position and verify the battery has adequate charge. If the issue continues, you may need assistance – please contact us.
Why does the LED stay blue and not turn green when underwater?
A blue light indicates the unit is powered on but not yet in active operation. If it does not switch to green, the water sensors may be stained or obstructed. Clean the sensor area gently and try again.
Why is the suction weak or debris not being collected properly?
Check whether the filter bag is full or blocked. Inspect the impeller area for debris with the unit switched off. Ensure the filter bag is fitted correctly and the side extensions are properly attached.
Why does the vacuum stop suddenly or indicate a clog?
The safety mechanism stops the impeller when clogging occurs. Remove the vacuum from the water, turn it off, and clear debris from the impeller or filter bag. If the impeller is damaged, it may require replacement.
Why is debris escaping from the filter bag after vacuuming?
Ensure the bag cord is secured under the flange and check for damage. Replace the bag if it is worn using genuine Kokido spare parts.
How do I know whether to use the standard or fine filter bag?
Use the standard bag for leaves and larger debris, and the fine bag for sand and fine sediment. Switching bags based on conditions helps maintain consistent suction.
Why is the impeller jammed, and how do I safely clear it?
Large debris may block the impeller. Switch the vacuum off, remove it from the water, and remove any obstruction carefully. Do not insert your fingers. If the impeller requires replacement, use genuine parts.
Why won’t the Telsa 90 charge, or why is the charging time longer than expected?
Ensure the charging plug is connected correctly and the charging port is clean and dry. Stained pins can interfere with charging. If charging continues to fail, the adaptor or battery may require inspection. For support,
contact us.
What should I do if the charging pins or water sensors are stained?
Clean the surfaces gently with a cotton bud dampened with lemon juice or vinegar, then dry them thoroughly before charging or using the vacuum.
Why can’t I secure or remove the side extensions properly?
Ensure the mounting points are clear of debris and the extensions are aligned with the slots. A firm press should produce a click when attached. Remove by reversing the process with steady pressure. Replace damaged attachment parts if needed.
Why doesn’t the unit run smoothly across the pool surface?
Wheels or extensions may have debris caught underneath. Rinse the wheels, sides, and underside of the cleaner to restore smooth operation.
Can I use the Telsa 90 on vinyl-liner or fibreglass pools without causing damage?
Yes. The vacuum is suitable for these surfaces. Take care to avoid sharp debris and steer gently around edges and steps to protect the pool finish.
Can I use the vacuum while people or pets are in the pool?
No. For safety, the vacuum should only be used when the pool is empty.
How should I empty and clean the filter bag to maintain performance?
Release the cord fastener, remove the bag, and rinse it thoroughly with fresh water. Use a soft brush only if needed. Replace the bag if damaged using genuine parts.
How should I drain, dry, and store the Telsa 90 after use or during long-term storage?
Rinse the cleaner with fresh water, drain thoroughly, and dry the charging port and pins. Store indoors in a cool, ventilated location away from heat and chemicals. For long-term storage, maintain a partial charge and recharge periodically.
