Professional-Grade Water Clarity Reset
Lo-Chlor Maxi-Floc Plus is a heavy-duty liquid flocculant developed to restore water clarity when fine suspended debris overwhelms normal filtration.
Combining a high-performance liquid floc with a concentrated polymer resin, Maxi-Floc Plus binds microscopic particles and organic matter into larger, heavier flocs that settle quickly on the pool floor, ready for removal by vacuuming.
Fast-acting and highly effective, it provides a controlled, professional reset for pools affected by severe cloudiness, post-treatment residue, or high particle load — delivering visible results within hours rather than days.
Features & Benefits
- Heavy-duty flocculation – rapidly binds fine debris and organic matter that standard filtration struggles to remove.
- Fast visible results – debris settles to the pool floor within 3–6 hours under optimal conditions.
- Effective after corrective treatments – ideal for removing dead algae and fine particulate residue.
- Polymer-enhanced formula – produces stronger, more stable flocs for reliable settling.
- Clean removal process – leaves no residue when vacuumed correctly.
- Suitable for freshwater and saltwater pools – engineered for consistent performance across modern pool systems.
How It Works
Cloudy water is often caused by microscopic particles that remain suspended due to electrical charge and water movement. These particles are too small to be effectively captured by standard sand or cartridge filtration.
Lo-Chlor Maxi-Floc Plus neutralises these charges and binds particles together using a polymer-enhanced flocculation process. Once combined, the heavier flocs settle naturally to the pool floor when circulation is paused.
This allows debris to be physically removed by vacuuming, restoring water clarity through controlled separation rather than extended filtration cycles.
How to Use
- Ensure the pool is free from active algae before treatment.
- Adjust pool water balance, ensuring pH is between 7.5 and 7.8.
- Set the filtration system to RECIRCULATE or BYPASS, or remove filter elements where applicable.
- With the pump running, evenly distribute the calculated dose around the pool.
- Circulate briefly, then turn the pump off to allow particles to settle.
- Allow 3–6 hours for debris to fully settle on the pool floor.
- Vacuum settled material slowly, preferably to waste.
- Clean the filter thoroughly after vacuuming and rebalance water if required.
Dosage & Coverage
- Standard Dosage: 1 litre treats up to 50,000 litres of pool water.
Important Usage & Compatibility Information
- For best results, ensure the pool has been fully sanitised prior to treatment.
- Filtration should be set to recirculate or bypass during application to allow flocs to settle undisturbed.
- Best results are achieved when TDS is below 1500 ppm. If TDS is higher, floc formation and settling may be less consistent.
- Vacuuming to waste is recommended where possible to prevent re-introducing debris to the system.
- Saltwater pools may produce lighter flocs due to ionic conditions; the polymer-enhanced formula is engineered to maintain effective settling.
Why Choose Lo-Chlor Flocculants & Clarifiers?
Lo-Chlor flocculants and clarifiers are developed for pool owners who value control, consistency, and professional-level results.
Trusted by pool professionals and manufactured in Australia, each formulation is designed to work predictably within modern pool systems, delivering clarity through proven chemistry rather than guesswork.
Whether maintaining everyday water quality or performing a targeted clarity reset, Lo-Chlor provides dependable solutions that support confident, well-managed pool care.
Frequently Asked Questions
What is the difference between a clarifier and a flocculant?
Clarifiers are designed to work with the filtration system, helping fine particles bind together so they can be filtered out over time. Flocculants work differently by causing particles to settle on the pool floor, allowing them to be removed by vacuuming rather than filtration.
How quickly will I see results?
Under optimal conditions, debris typically settles within 3 to 6 hours. Vacuuming can then be carried out to restore water clarity.
Is Maxi-Floc Plus suitable for saltwater pools?
Yes. In saltwater pools, ionic conditions can affect floc appearance. Maxi-Floc Plus includes a polymer resin to support effective floc formation and settling in salt-chlorinated systems.
Should filtration be running during treatment?
Filtration should be set to recirculate or bypass during application. Once circulation is stopped, particles are allowed to settle undisturbed for effective vacuum removal.
Can I swim after using Maxi-Floc Plus?
Swimming is recommended only after settled debris has been fully vacuumed, filtration restored, and water balance returned to normal operating ranges.
Is this product for routine maintenance?
Maxi-Floc Plus is intended as a corrective or reset treatment for significant cloudiness. For routine clarity maintenance, a clarifier is generally more suitable.
