Onga SuperFlo VS 800 Energy Efficient Variable Speed ECO Pool Pump. 4Y Warranty, 4.5 Star Rated, Quiet
In stock
Order now while supplies last!
Satisfaction Guarantee
All products covered
Same Day Dispatch
On orders placed by 12pm AEDT
Price Match
Quick, simple & easy
Secure Shipping with Tracking
Guaranteed to arrive safely
Flat rate shipping
Per order Australia-wide
Free, Easy Returns
Hassle-free and convenient
Customer Service & Support
Dedicated call center
Efficient Pool Circulation with Dependable Speed Control
The Onga SuperFlo VS 800 Variable Speed ECO Pool Pump delivers dependable everyday circulation with the flexibility to handle higher-flow pool tasks when needed. Its permanent magnet DC motor and variable-speed control allow the pump to run lower for regular filtration, then increase speed for suction cleaning, backwashing, solar heating or water features.
Assembled in Australia with quality components, the SuperFlo VS 800 combines advanced hydraulic design, sound-dampening construction and a durable thermoplastic composite body. It is a practical upgrade or replacement pump for new and existing pools, offering quiet operation, energy-saving performance and long-term reliability.
Benefits
Energy Efficient
Permanent magnet DC motor technology improves pump efficiency.
Variable Speed Control
Three programmable speeds suit filtration, cleaning, backwashing and heating.
Easy Speed Control
Clear control panel makes Low, Medium and High speed selection simple.
Durable Build
Thermoplastic composite resin body stands up to harsh pool conditions.
Lower Running Costs
Lower-speed operation helps reduce electricity use over time.
Quiet Operation
Sound-dampening casing and base help soften pump noise.
Key Features
- Axial flux, brushless permanent magnet DC motor
- Three programmable speed settings with 50-RPM adjustment
- Adjustable speed range from 1,000 to 2,850 RPM
- Factory default speeds for filtration, cleaning and higher-flow pool tasks
- Fault protection for voltage, current, rotor and temperature conditions
- Advanced hydraulic design with precision-fit internal components
- Durable thermoplastic composite resin construction
- High-capacity trap basket with easy quarter-turn lid access
- Quick-disconnect barrel unions for installation and servicing
- Backed by a 4-year warranty
Factory Preset Speeds
| Speed | Factory Default RPM | Common Use |
|---|---|---|
| Low | 1450 RPM | Everyday filtration and water circulation |
| Medium | 2400 RPM | Suction cleaning and stronger circulation |
| High | 2800 RPM | Backwashing, water features and solar heating |
Note: The SuperFlo VS 800 starts slowly, then ramps up to high speed for the first 2 minutes to assist priming before switching to the selected speed. It has an adjustable speed range from 1,000 to 2,850 RPM, with speed settings adjustable in 50-RPM increments.
Technical Specifications
| Electrical Rating | 230–240V 50Hz single phase |
|---|---|
| Input Power (P1) | 175W at 1600 RPM; 490W at 2400 RPM; 820W at 2850 RPM |
| Current Draw | 1.5A at 1600 RPM; 4.2A at 2400 RPM; 6.5A at 2850 RPM |
| Maximum Rating | 2850 RPM, 820W, 6.5A |
| Motor Type | Axial flux, permanent magnet DC motor |
| Protection | Mains over-voltage, mains under-voltage, over-temperature, under-temperature, locked rotor, over-current and phase disconnect protection |
| Ingress Protection | IP25 |
| Inlet / Outlet Connection | ABS barrel union to suit 40mm PVC pressure pipe to AS/NZS 1477 |
| Maximum Working Pressure | 260 kPa |
| Water Temperature Range | 5°C–40°C |
| Maximum Ambient Temperature | 55°C |
| Recommended pH Range | 7.2–7.8 guide only |
| Supply Cord | 10A, H07RNF, 2m |
| Warranty | 4 years |
Performance and power use vary with hydraulics, installation, selected RPM, filter condition and pool setup.
Frequently Asked Questions
What is the annual energy consumption?
610.16 kWh per year, based on a daily run time of 6.3 hours. For a quick cost guide, multiply 610.16 by your electricity price. For example, at 59.59 c/kWh, that’s roughly $1.00 per day or $30.30 per month. Actual results vary with tariffs, hydraulics, run time and chosen RPM.
Can I change the preset speeds?
Yes. The Low, Medium and High speed settings can be adjusted between 1,000 and 2,850 RPM in 50-RPM increments. This lets the pump be tuned to suit your pool’s plumbing, filtration needs and cleaning setup.
Which speed should I use for everyday filtration?
Low speed is generally used for everyday filtration and water circulation. Medium or High may be needed when the pool requires stronger flow, such as suction cleaning, backwashing, solar heating or running some water features.
Why does the pump run at high speed when it starts?
The pump starts slowly, then ramps up to high speed for the first 2 minutes to help with priming. After that, it switches back to the selected speed setting.
What should I check if the flow seems low?
Check that the pump is properly primed, the trap basket and filter are clean, the water level is high enough, and the lid seal is clean and seated correctly. Also check that the selected speed is suitable for the task and that the suction line is not drawing air.
How often should the trap basket be cleaned?
Check the trap basket at least once a week and empty leaves or debris before they restrict water flow. Keeping the basket clear helps maintain pump performance and efficiency.
Can this pump be used for suction cleaning?
Yes. The pump includes a medium speed setting for suction cleaning and stronger circulation. The best setting may depend on the cleaner type, plumbing layout, filter condition and required flow.
| SKU | SUFL-ECO |
|---|---|
| GTIN | 9318910102600 |
| Barcode | PRFL-800-ECO |
| Package Length | 71 cm |
| Package Width | 35 cm |
| Package Height | 40 cm |
| Warranty | 4 Years |
| Product Type | Pool Pump |
| Brand | Onga |
| Model | SuperFlo VS 800 |
| Shipping Type | Standard |
| Horse Power | 1.25 |
| Watts | 820 |
| Amps | 6.5 |
| Energy Efficient (ECO) | Yes |
| Star Rating | 4.5 |
| Energy Consumption | 610.16 kWh/Y (based on 6.3 hours of daily run time) |
| Noise (Decibels) | 66 dBa @ 1 metre |
| Flow Rate (litres per minute) | 250 @ 10m Head |
| Dimensions LxWxH (mm) | 581x213x276 |
Shipping
Same-day dispatch applies to orders received by 12.00 pm (AEST) during business days. Orders received after 12.00 pm and on weekends or public holidays will be dispatched on the next business day.
Delivery fees are $19.95 flat-rate per order Australia-wide, no matter how many products are in it. Orders containing bulky items like sand filters, acoustic boxes, heat pumps, pool covers, and pool slides may incur additional fees as they require specialized carriers.
Below are the estimated time to arrival in business days once an order is shipped.
| Destination | Sydney | NSW | VIC | QLD | SA | WA/NT |
|---|---|---|---|---|---|---|
| Business Days | 1 - 2 | 2 - 4 | 2 - 4 | 2 - 4 | 3 - 4 | 5 - 6 |
Rural and remote addresses, where delivery is not provided every day, may take longer.
Returns
Satisfaction Guarantee: If you are not satisfied with a product for any reason, you are welcome to return it to us for a full refund or exchange within 30 days of the purchase date - even if you have used the product. Returns are free, and we will cover return shipping.
We take full responsibility for the safe arrival of the products that you order from us. We will replace at our expense any product that arrives faulty, damaged during transit, or is the incorrect product. Click here for details
If you have any questions about our shipping policy or our return policy, please contact us on 1300 766 619 or through our contact us form.