Spa Electrics RM-2 2-Channel Remote Control System for Pool & Spa Lights

The Spa Electrics RM-2 2-Channel Remote Control System is the ultimate solution for managing your pool and spa lighting with ease and style. This sleek remote allows you to power and sync your lights effortlessly, whether you're indoors or outdoors. Installation is a breeze with its plug-and-play setup—simply connect your Spa Electrics transformer to the RM-2 receiver and take instant control.

Beyond pool and spa lights, the RM-2 can also control garden lights, pumps, and other outdoor equipment. With a durable, weatherproof design and long-range RF signal, this Australian-made system offers unmatched convenience and reliability.

Benefits:

• Premium Handset Design. Capacitive touch screen remote constructed from premium materials and scratch resistant acrylic screen.
• Long Range RF. Never lose signal again. With Spa Electrics long range RF you can control your lighting system from up to 50 meters away.
• Plug & Play Installation. Simply plug your Spa Electrics transformer into the base of the RM2 and take instant control of your lighting system.
• Suitable for New & Existing Pools*. Using Spa Electrics patented technologies, this system can be installed on existing pools without the need to replace the pool light cable or transformer.

Tip: For extra convenience, you can get additional remotes, like for example one for inside the house and others for outdoors.

Features:

• Suits all pool and spa lights, as well as any other outdoor application you could think. Like garden lighting, security lighting, water filters, water pumps, etc
• Weatherproof and durable. Heavy-duty construction, made with the utmost quality materials, rated IP23. Convenience that lasts.
• Incredibly easy and simple installation. No wiring required. Plug and play. Simply unplug the lights from the power point and plug them in the control unit and you are ready to go. A simple upgrade will make your life easier.
• Long-range remote designed to go through walls and equipped with a long-life battery will ensure you will have no problems using it from inside the house.
• Multiple remotes can be used per system. More convenience for you as you can have a remote inside the house, and a few outdoors at the pool or spa for example.
• Suits Multi-colour Lights. You can use the remote to change the colours of your multi-colour LED lights**, not just turn them on or off.

(*) For Retro-fit installations, where existing transformers have been hard-wired; a suitably qualified electrician must disconnect the transformers and terminate with a plug top connection. OR the transformers are to be replaced with the Spa Electrics LV25-12 or LV50-12 models.

(**) The RM-2 does not provide direct colour selection. To change colours on multi-colour lights, use the power cycling method outlined in the light’s manual (turn off for 2 seconds, then on to cycle through colours).

Technical Information:

• Input: 230-240VAC, 10 Amps
• Output: 2 X 240VAC ~ 50Hz Switched
• Max. Load: 2400W Max. Total
• Battery: 2 x 'AAA'
• Range: Up to 50m - line of sight
• Freq: 800MHz

iRIS Lighting Controller Overview:

	RM-WF	RM-3	RM-2
LED Compatibility	Multi Plus*	Multi Plus	All
Mobile App	✓	✕	✕
Handset	✕	✓	✓
Signal	Wi-Fi	RF	RF
Colour Selection	✓	✓	✕
Brightness Control	✓	✓	✕
Speed Control	✓	✕	✕
Schedules	✓	✕	✕
Channels/Zones	2	2	2
Additional GPO	✓	✓	✓
Batteries	—	2xAAA	2xAAA

*On/Off & Schedules compatible with ALL Spa Electrics LED products. Full functionality ONLY available with Spa Electrics MultiPLUS LEDs.