Complete Cordless Pool Cleaning – From Full Cycles to Quick Touch-Ups
Bring together two cordless Aiper cleaners for a more complete pool-care routine. The Scuba SL handles regular robotic cleaning across the floor, walls, and waterline, while the Pilot X1 gives you fast, targeted control for steps, ledges, spas, hot tubs, corners, shallow areas, and small debris patches between full cleaning cycles.
Use the Scuba SL for effortless whole-pool cleaning, then reach for the Pilot X1 when leaves, sand, or fine debris collect in smaller spaces or hard-to-reach areas. Together, they give you the convenience of robotic cleaning with the flexibility of handheld spot cleaning, so your pool and spa areas stay easier to maintain from one swim or soak to the next.
Aiper Scuba SL: Full-Cycle Robotic Cleaning
The Aiper Scuba SL delivers confident, hands-off pool cleaning with WavePath navigation, a low-profile body, and up to 150 minutes of cordless runtime. It cleans the floor, walls, and waterline in one uninterrupted cycle, with one-click start for simple operation. Scheduled Periodic Cleaning performs a 45-minute floor clean every 48 hours, helping support regular upkeep between full cleaning cycles. Learn More
- Floor, wall and waterline cleaning – complete robotic coverage in a single cycle.
- WavePath intelligent navigation – organised floor and wall paths for more consistent cleaning.
- 15,000 LPH suction – strong debris pickup across common pool surfaces.
- Tri-motor drive system – two drive motors and one pump motor for stable movement and suction.
- Caterpillar treads – confident grip on floors, slopes, walls and waterline areas.
- Up to 150-minute runtime – suitable for pools up to 150 m².
- Scheduled Periodic Cleaning – 45-minute floor clean every 48 hours for low-effort upkeep.
- 3.5 L top-load filter basket – easy access for rinsing and maintenance.
Aiper Pilot X1: Quick Cleaning at Your Command
The Aiper Pilot X1 is made for fast, targeted cleaning in the areas that often need extra attention. Lightweight, cordless, and simple to control, it works across steps, shallow ledges, spas, corners, platforms, and pool floors. Switch between shallow-area cleaning from just 0.2 m of water and deeper cleaning down to 2.5 m, with an overall operating depth range of 0.2–3.0 m. Learn More
- Dual-depth cleaning – shallow mode from 0.2 m and deep cleaning up to 2.5 m.
- 4800 LPH suction – strong pickup for leaves, sand, dust and everyday debris.
- 2-stage filtration – 360 μm filter for larger debris and 100 μm ultra-fine filter for sand and dust.
- Flexible swivelling vacuum head – glides around curves, corners, stairs and platforms.
- 45-minute runtime – ideal for quick manual cleaning sessions.
- 1 L drawer-style debris bin – easy, mess-free emptying without filter bags.
- 2.5-hour fast charging – quick turnaround between cleaning sessions.
- Includes telescopic pole and wall mount – practical reach and organised storage.
Why This Bundle?
The Scuba SL and Pilot X1 cover two different parts of pool care. Scuba SL handles the full robotic clean across the main pool area, while Pilot X1 gives you direct control for smaller spaces, shallow areas, and quick debris clean-ups between full cycles.
- Full-Cycle + Spot Cleaning: Robotic cleaning for the main pool, handheld vacuuming for detail areas.
- Better Everyday Upkeep: Use Scuba SL for routine cleans and Pilot X1 for steps, corners, spas and shallow ledges.
- Completely Cordless: No cables across the pool area and no connection to the pool filtration system.
- Detail-Area Cleaning: Pilot X1 gives you direct control for steps, ledges, corners, spas, hot tubs and shallow areas.
- Simple Maintenance: Easy-empty filter baskets, quick water release and practical storage accessories.
Technical Specifications
|
Aiper Scuba SL |
Aiper Pilot X1 |
| Pool Role |
Robotic deep clean: floor, walls and waterline |
Manual spot clean: steps, spas, corners, ledges and shallow areas |
| Ideal Pool Type |
In-ground pools |
In-ground pools, above-ground pools, inflatable pools, spas and hot tubs |
| Coverage |
Up to 150 m² / 15 m length |
Manual cleaning with included telescopic pole |
| Cleaning Area |
Floor, walls and waterline |
Floor, stairs, steps, ledges, corners and shallow/deep areas |
| Navigation / Control |
WavePath navigation with one-click start |
Manual control with flexible swivelling suction head |
| Water Flow / Suction |
15,000 LPH / 250 LPM |
4800 LPH / 80 LPM |
| Motor System |
Tri-motor system: 2 × drive motors + 1 × pump motor |
1 × pump motor |
| Filtration |
180 μm fine filter basket; optional 3 μm ultra-fine filter |
360 μm fine filter + 100 μm ultra-fine filter |
| Filter Capacity |
3.5 L top-load basket |
1 L drawer-style debris bin |
| Runtime |
Up to 150 minutes |
Up to 45 minutes |
| Charging Time |
Approx. 3 hours |
Approx. 2.5 hours |
| Cleaning Modes |
Smart/Auto, Floor, Wall, Periodic/Eco |
Shallow Area Mode and Deep Area Mode |
| Operating Depth |
0.5–3.0 m |
0.2–3.0 m |
| App Control |
No |
No |
| Weight |
6.5 kg |
3.3 kg |
In the Box
- 1 × Aiper Scuba SL, 1 × DC Charger, 1 × Retrieval Hook, 1 × User Manual
- 1 × Aiper Pilot X1, 1 × Telescopic Pole, 1 × Wall-mount Holder, 1 × DC Charger, 1 × User Manual
Frequently Asked Questions
Who is this bundle best suited to?
This bundle is best for pool owners who want regular robotic cleaning plus fast manual spot cleaning. The Scuba SL handles the main pool clean across the floor, walls, and waterline, while the Pilot X1 is used for steps, shallow ledges, spas, hot tubs, corners, and quick debris clean-ups between full robotic cycles.
Can the Pilot X1 clean areas that need more precise control?
Yes. The Pilot X1 is handheld and guided with the included telescopic pole, giving you direct control over steps, ledges, platforms, corners, spas, and smaller debris patches. Its flexible swivelling vacuum head helps follow curves and reach into tighter areas.
Is the Pilot X1 suitable for spas and hot tubs?
Yes. The Pilot X1 is suitable for spas, hot tubs, inflatable pools, above-ground pools, and inground pools. It can operate in shallow water from 0.2 m, making it useful for smaller spaces and areas where a full robotic cleaning cycle may not be necessary.
What does the Scuba SL clean?
The Scuba SL cleans the pool floor, walls, and waterline in compatible inground pools. It uses WavePath navigation, caterpillar treads, and up to 150 minutes of cordless runtime to support organised full-pool cleaning.
Does the Scuba SL have a scheduled cleaning mode?
Yes. The Scuba SL includes Scheduled Periodic Cleaning, which performs a 45-minute floor clean every 48 hours when activated with a full charge. This helps maintain the pool floor between full cleaning cycles.
What types of debris can the two cleaners collect?
The Scuba SL collects common pool debris such as leaves, sand, and dirt using its 180 μm fine filter basket. The Pilot X1 adds two-stage filtration, with a 360 μm filter for larger debris and a 100 μm ultra-fine filter for smaller particles such as fine sand and dust.
How long do the batteries last?
The Scuba SL runs for up to 150 minutes and charges in about 3 hours. The Pilot X1 runs for up to 45 minutes and charges in about 2.5 hours.
Should I run the pool pump while using the Scuba SL?
No. For best results, turn off the pool pump while the Scuba SL is cleaning. Running the pump can affect the cleaner’s movement, suction, and navigation.
How do I clean and maintain the filters?
After use, empty and rinse the Scuba SL’s 3.5 L top-load filter basket and check the roller brush and inlet area for debris. For the Pilot X1, slide out the 1 L debris bin, rinse the filter components, and make sure the bin clicks securely back into place before use.
What should I check if the Scuba SL stops early or loses performance?
Check whether the filter basket is full, the inlet area is blocked, or debris is caught around the roller brush. Also make sure the cleaner is fully charged before starting a full cycle or Scheduled Periodic Cleaning mode.
What should I check if the Pilot X1 suction feels weak?
Check that the debris bin is fully clicked into place and that the filters are not clogged. Rinse the 360 μm and 100 μm filter layers thoroughly, then reinstall them before use. Low battery can also reduce cleaning performance, so recharge if needed.
How should I store both cleaners?
Rinse and dry both cleaners before storage. Keep the Scuba SL indoors or in a protected dry area when not in use. The Pilot X1 includes a wall-mount holder, making it easy to store neatly with the pole and accessories between quick clean-ups.
Note!
Differences between Product Illustrations and Actual Products: The product illustrations, including product pictures, images and display contents, displayed on the website are for reference only. Actual products may vary slightly in appearance, colour, logo, dimension or size due to production batches, improvements and regional requirements. Please refer to the actual product received. The final interpretation of product specifications and appearance belongs to Aiper.
