Complete Cordless Cleaning from Surface to Floor
Keep more of your pool looking clean and ready to enjoy. The Scuba SL delivers cordless robotic cleaning across the floor, walls, and waterline, while the Surfer S2 keeps the water surface clear with solar-powered skimming for leaves, pollen, insects, and floating debris.
Aiper Scuba SL: Full-Cycle Robotic Cleaning
The Aiper Scuba SL delivers confident, hands-off pool cleaning with WavePath navigation, a low-profile body, and up to 150 minutes of cordless runtime. It cleans the floor, walls, and waterline in one uninterrupted cycle, with one-click start for simple operation. Scheduled Periodic Cleaning performs a 45-minute floor clean every 48 hours, helping support regular upkeep between full cleaning cycles. Learn More
- Floor, wall and waterline cleaning – complete robotic coverage in a single cycle.
- WavePath intelligent navigation – organised floor and wall paths for more consistent cleaning.
- 15,000 LPH suction – strong debris pickup across common pool surfaces.
- Tri-motor drive system – two drive motors and one pump motor for stable movement and suction.
- Caterpillar treads – confident grip on floors, slopes, walls and waterline areas.
- Up to 150-minute runtime – suitable for pools up to 150 m².
- Scheduled Periodic Cleaning – 45-minute floor clean every 48 hours for low-effort upkeep.
- 3.5 L top-load filter basket – easy access for rinsing and maintenance.
Aiper Surfer S2: Solar Skimming That Doesn’t Clock Off
Surfer S2 keeps the surface crystal clear around the clock. With SolarSeeker technology, it repositions itself into sunlight for recharging and resumes cleaning automatically. A full DC charge provides up to 35 hours of runtime – perfect for cloudy stretches. The 150 µm fine filter and wide 22.7 cm inlet pull in everything from pollen and dust to twigs and gum nuts. Dual dToF optical sensors detect obstacles early, while DebrisGuard prevents collected debris from leaking back out. With its built-in chlorine dispenser and app control, surface maintenance has never been easier. Learn More
- 24/7 solar operation with SolarSeeker and up to 35-hour DC runtime.
- 150 µm filtration + 22.7 cm inlet – captures fine dust, insects, and large debris.
- DebrisGuard leak-proof baffle – keeps captured debris securely sealed.
- Built-in chlorine dispenser – accepts Ø76 × 25 mm tablets with adjustable flow.
- dToF optical obstacle avoidance – smoother navigation and fewer stalls.
- Aiper App control – start, stop, steer, and schedule clean-ups remotely.
- 4 L side-drawer debris basket – easy emptying, less mess.
Why This Bundle?
The Scuba SL and Surfer S2 support two different parts of pool care. Surfer S2 keeps the water surface clearer throughout the day, while Scuba SL handles the robotic clean below the surface across the floor, walls, and waterline.
- Surface + Robotic Cleaning: Solar skimming above the water, cordless robotic cleaning below the surface.
- Better Everyday Upkeep: Helps manage leaves, pollen, insects, and floating debris between full cleaning cycles.
- Completely Cordless: No cables across the pool area and no connection to the pool filtration system.
- Reliable Routine Cleaning: Scuba SL supports full cleaning cycles plus scheduled floor maintenance.
- Surface Debris Support: Surfer S2 captures fine dust, insects, and larger leaf litter with 150 µm filtration.
- Simple Maintenance: Easy-empty baskets, solar top-ups, app control, and practical daily upkeep.
Technical Specifications
|
Aiper Scuba SL |
Aiper Surfer S2 |
| Pool Role |
Robotic clean: floor, walls and waterline |
Continuous surface skimming |
| Ideal Pool Type |
In-ground pools |
Most pool shapes with a boundary; not suitable for infinity/zero-edge pools |
| Coverage |
Up to 150 m² / 15 m length |
Surface cleaning |
| Cleaning Area |
Floor, walls and waterline |
Water surface |
| Navigation / Sensing |
WavePath navigation with one-click start |
dToF optical sensors with self-rescue and anti-stranding support |
| Water Flow / Suction |
15,000 LPH |
High-efficiency surface suction |
| Motor System |
Tri-motor system: 2 × drive motors + 1 × pump motor |
3 brushless motors: 2 × propeller + 1 × impeller |
| Filtration |
180 μm fine filter basket; optional 3 μm ultra-fine filter |
150 μm fine filter basket |
| Filter Capacity |
3.5 L top-load basket |
4 L side-drawer debris basket |
| Runtime |
Up to 150 minutes |
24/7 solar top-ups; up to 35 hours DC runtime |
| Charging Time |
Approx. 3 hours |
Approx. 4.5 hours by DC charger |
| Cleaning Modes |
Smart/Auto, Floor, Wall, Periodic/Eco |
Automatic Cleaning Mode / App Remote Mode |
| Operating Depth |
0.5–3.0 m |
Surface operation |
| App Control |
No |
Yes; start/stop, remote steering, schedules and status alerts |
| Charging / Power |
DC charger |
Solar charging panel + DC charger |
| Weight |
6.5 kg |
5.7 kg |
In the Box
- 1 × Aiper Scuba SL, 1 × DC Charger, 1 × Retrieval Hook, 1 × User Manual
- 1 × Aiper Surfer S2, 1 × DC Charger, 1 × User Manual, 1 × Foam Noodle, 1 × Quick Start Guide
Frequently Asked Questions
How does Surfer S2 help reduce debris on the floor?
Surfer S2 skims the water surface and collects floating leaves, insects, pollen, dust, and light debris before they settle on the pool floor. This helps keep the surface clearer and can reduce the amount of debris Scuba SL needs to collect during its robotic cleaning cycle.
Can I run Surfer S2 while Scuba SL is cleaning?
Yes. Surfer S2 works on the water surface while Scuba SL cleans below the surface, so they can be used in the same pool. For best results, turn off the pool pump while the Scuba SL is operating, as strong water movement can affect navigation and cleaning performance.
Will the Scuba SL clean the whole pool?
The Scuba SL cleans the pool floor, walls, and waterline in compatible inground pools up to 150 m². WavePath navigation, caterpillar treads, and up to 150 minutes of runtime help support organised full-pool cleaning.
Can the Scuba SL help keep the pool clean between full cycles?
Yes. Scheduled Periodic Cleaning performs a 45-minute floor clean every 48 hours when activated with a full charge, helping maintain the pool floor between full cleaning cycles.
How long can each cleaner run?
Scuba SL runs for up to 150 minutes and charges in about 3 hours. Surfer S2 can keep skimming with solar top-ups and provides up to 35 hours from a full DC charge.
Can the Surfer S2 stay in the pool every day?
Yes. Surfer S2 is made for ongoing surface skimming with solar top-ups. Empty and rinse the basket regularly, keep the solar panel and sensors clean, and check the filter basket often during heavy leaf periods.
Do I still need to empty the baskets often?
Yes. Empty the Surfer S2’s 4 L basket regularly so surface debris does not build up. After Scuba SL cleaning cycles, rinse the 3.5 L top-load basket, especially after wind, heavy leaves, or fine debris loads.
Why has the Scuba SL stopped early or lost suction?
Check whether the filter basket is full, the inlet area is blocked, or debris is caught around the roller brush. Also make sure the cleaner is fully charged before starting a full cycle or Scheduled Periodic Cleaning mode.
Why does the Surfer S2 keep reversing, spinning, or getting stuck?
Clean the optical sensor lenses, check the propellers and impeller for debris, and confirm the anti-stranding columns are adjusted correctly. If it catches near a fixed skimmer entrance, place the included foam noodle at the skimmer mouth and reduce that suction while the S2 is running.
How should I look after both cleaners?
Rinse and dry both cleaners before storage. Keep the Scuba SL basket, roller brush, and inlet area clear. Keep the Surfer S2’s solar panel, sensors, filter basket, and debris drawer clean for reliable surface skimming.
Note!
Differences between Product Illustrations and Actual Products: The product illustrations, including product pictures, images and display contents, displayed on the website are for reference only. Actual products may vary slightly in appearance, colour, logo, dimension or size due to production batches, improvements and regional requirements. Please refer to the actual product received. The final interpretation of product specifications and appearance belongs to Aiper.
