"Quiet and Intelligent"
Unlike typical suction pool cleaners that are pushed around by the hose and the currents, the PoolVac quietly drives itself around the pool following a predetermined programmed path intelligently designed to cover all of your pool without getting neither stuck nor tangled.
By using an exclusive turbine system it achieves a constant and balanced water flow while moving across the pool. This system makes it one of the most remarkably quiet pool cleaners in the market today.
The PoolVac shines where most fail: in pools of odd shapes and where pollen, sand and even twigs and pebbles are a headache. This, and the durability of the PoolVac, are the main reasons why people who try it never change to anything else.
The Large Deluxe Leaf Canister traps large debris, such as leaves, twigs, and other items, before they can reach your filtration system. This prevents clogs, reduces wear and tear on pool equipment, and ensures consistent cleaning performance.
Benefits:
-
Enhanced Debris Management.
The included Large Deluxe Leaf Canister captures heavy loads of leaves and debris before they reach your pool's filtration system, reducing strain, preventing clogs, and prolonging equipment life.
-
Clog-Free Cleaning.
Equipped with a superior turbine design and vacuum wings, the Pool Vac XL handles debris of all sizes—from fine pollen and sand to leaves, twigs, and even small pebbles—without clogging.
-
Gentle on Pool Surfaces.
The lightweight design and hydro-dynamic head prevent surface damage, making it ideal for all pool types, including vinyl, fiberglass, granite, and tile.
PoolVac Ultra/XL Cleaner Features:
- Exclusive AquaPilot Technology: Preprogrammed steering delivers intelligent, full-pool coverage for a cleaner, more efficient experience.
- Quiet Operation: The turbine-drive system eliminates noisy parts and pulsating hoses for a serene pool environment.
- No Additional Equipment Required: Operates using your existing filtration system—no booster pump or extra gear needed.
- Enhanced Vacuum Wings and Skirt: Designed for efficient debris pickup and constant suction power.
- Hydro-Dynamic Head Design: Engineered for smooth navigation and optimal performance.
- Advanced Pod Propulsion System: Eliminates the need for wheels and belts, ensuring consistent performance and a long service life.
Complete Cleaning
Their exclusive steering system allows them to move quickly and methodically to clean the pool efficiently in an average time of between two and three hours.
Simple
Can be directly connected to the vacuum fitting or skimmer. They operate with the filter pump without the use of tools or an electrical connection.
Unique design
Virtually eliminates clogs without sacrificing energy efficiency.
Large Deluxe Leaf Canister Features:
- Extra-Large Basket: Accommodates significant amounts of debris, ideal for leafy pools.
- Clog Prevention: Protects the filtration system from damage caused by clogging or straining.
- Transparent Canister: Allows for quick debris inspection.
- Easy Maintenance: Ergonomically designed with an automatic water release valve for easy removal and cleaning.
- Durable Construction: Built to withstand heavy loads and frequent use.
Why Choose the PoolVac Ultra/XL with Large Deluxe Leaf Canister?
The addition of the Large Deluxe Leaf Canister makes this package perfect for pools that contend with significant debris, such as fallen leaves and twigs. The canister complements the PoolVac Ultra/XL’s intelligent navigation and powerful suction, ensuring a thorough and trouble-free cleaning experience. By reducing strain on your filtration system and cutting down on maintenance, this combination gives you a cleaner pool with less effort.
Sit back, relax, and let the Hayward PoolVac Ultra/XL with Large Deluxe Leaf Canister handle the hard work.
Specifications:
- Pool Coverage:* Floor, walls, coves
- Hose Length: 12m
- Pool Size: Up to 6m x 12m
- Pool Surface:** Gunite, vinyl, fiberglass, pebble, tile
- Drive Sequence: AquaPilot programmed steering system
- Traction System: Pod and shoes
* Wall climbing capability and pool coverage may be affected by specific pool shapes and surfaces. The cleaner may not climb the wall under certain conditions.
** Different shoe types available for different pool surfaces.
Warranty:
- 3 Years
- 1 Year on wearable parts (drive tracks, shoes, wings, tyres and flaps).
- 1 Year on Hayward Large Leaf Canister
In The Box:
- 1 x Pool Vac XL Suction Cleaner
- 1 x Large Leaf Canister
- Hoses 1+11:
1. Principal 1m (VVX101BBP)
2. Following 1m (VVX101BBF)
- 1 x Owner’s manual
Frequently Asked Questions
How do I know if the Pool Vac XL has the correct water flow to operate properly?
Use the supplied flow gauge to confirm the cleaner is receiving the correct amount of suction. The black indicator should sit between the MIN and MAX marks. If the reading is too high, adjust using the regulator valve or your skimmer valves. If the reading is too low, check for blockages or filtration issues, as the regulator cannot increase flow.
Why is my cleaner moving slowly or not moving at all?
Slow or stalled movement is usually caused by insufficient water flow, blocked debris in the throat, or worn or incorrect shoes for your pool surface. Check the flow gauge, clear any blockages, and inspect the shoes and wings for wear. Make sure you are using the correct pod shoes for your pool type (Fibreglass/Vinyl or Concrete), as the wrong shoes can reduce traction and performance.
What should I do if the cleaner keeps getting stuck on steps, corners, or obstacles?
Confirm the water flow is within the recommended range and ensure the hose length reaches the longest point of the pool with two extra sections. Worn shoes or wings may also cause the cleaner to lose traction. In rare cases, steering components may require cleaning or replacement.
Why does my Pool Vac XL climb too high on the walls and suck air?
If the cleaner reaches the surface, the water flow is too strong or the rear flap tension is incorrect. Reduce suction using the regulator valve or skimmer valves and set the rear flap adjuster to Position I. If needed, make further small reductions until the cleaner stays submerged.
Why isn’t my cleaner climbing the walls in my concrete or fiberglass pool?
Wall climbing depends on correct suction, rear flap tension, and the right shoes for the pool surface. Confirm the flow with the gauge, set the rear flap adjuster to Position III, and check that you are using the correct pod shoes for concrete or fibreglass. Worn shoes or wings will also reduce climbing ability. If the floor-to-wall transition has a very sharp angle, this can limit how far the cleaner can climb.
Why does the cleaner head float instead of staying on the pool floor?
The cleaner head is heavier than water and should not float. Floating generally indicates trapped air inside the cleaner or air entering from the return jets. Submerge the cleaner fully to remove air, check for bubbles coming from the hose, and redirect return jets downward.
How do I stop the return jets from interfering with the cleaner’s movement?
Point the return jets downward and away from the hose. Strong surface return flow can push the hose or disturb the cleaner’s programmed path, preventing proper coverage.
How should I set up, manage, and store the hose (length, tangling, and coiling) to ensure proper cleaner performance?
The hose must reach the furthest point of the pool plus two extra sections. A hose that is too short or develops a coil “memory” can interfere with navigation. Store hose sections straight, never coiled, and check joints regularly to ensure airtight connections.
How often should I check or replace the shoes, wings, or flaps?
Inspect wear parts regularly. Shoes and wings include wear indicators and should be replaced when the lines are no longer visible. Flaps should be replaced if damaged or worn. Using the correct parts is essential for consistent performance.
How do I access and clear debris from the turbine or vacuum chamber?
Use the Easy Opening Bottom feature. Turn off the pump, remove the cleaner, loosen the captive screw, and lift the bottom cover. Clear any debris from the turbine area, check that the turbine spins freely, and reinstall the cover securely before placing the cleaner back in the pool.
Why is my cleaner not following its normal programmed steering pattern?
Steering issues may be caused by debris in the rear screen, a jammed cone gear, low water flow, or worn internal drive components. Clean the rear screen, confirm smooth gear rotation, and check the turbine and spindle gear assemblies.
Should I remove the cleaner before backwashing, shocking, or super-chlorinating the pool?
Yes. Always remove the cleaner and hose during backwashing, super-chlorination, or when adding concentrated chemicals. This prevents unnecessary wear on components.
Can the Pool Vac XL be used in vinyl-liner pools, and will it climb the walls?
Yes, the cleaner can be used in in-ground and above-ground vinyl-liner pools. Due to the sharp angles and shape of most vinyl pools, its cleaning pattern is generally confined to the floor (shallow and deep) and the hopper sides rather than the vertical walls. Hayward turbine cleaners do not climb vertical vinyl walls, but in practice most dirt in vinyl pools does not adhere to those walls. In one-piece fibreglass pools, there is usually very little dirt on the walls, but the cleaner will still climb them when conditions (flow, shoes, and radius) are correct.
What does the rear flap adjuster do, and how should I set it?
The rear flap adjuster regulates how firmly the cleaner grips the surface. Position II is the default setting. Position I reduces climbing and prevents the cleaner from reaching the surface, while Position III increases upward traction for improved wall climbing in concrete or fiberglass pools.
