Ultimate Cleaning Power Delivering Unmatched Performance And Ease Of Use
"Relentless" - Witness the transformation of your backyard into a haven of cleanliness with the Pentair Onga Warrior Pool Cleaner. Like an unlikely hero in an action-packed saga, the relentless Warrior stands poised beside your pool, ready to change everything you knew about pool cleaning.
No debris is safe, no obstacle too big. Watch in awe as the relentless Warrior surges along the pool floor, navigates up the walls, and conquers every inch with unmatched agility.
Engineered for Australian pools, this cleaner is the epitome of efficiency and sleek design. It's your go-to solution for tackling everything, including challenging debris, with relentless determination.
With its two-wheeled design and advanced programmed steering, the Warrior effortlessly navigates through every nook and cranny of your pool. Its ability to handle 90-degree floor-to-wall angles, variable depths, and tight corners is unparalleled.
Quick to set up and even easier to operate, this pool cleaner blends power with simplicity, making pool maintenance a hassle-free task. The relentless Warrior is here to ensure a pristine swimming experience like no other.
Benefits:
- Effortless Cleaning: The Warrior’s streamlined design ensures a thorough cleaning with minimal effort from you. Just set it in your pool and it takes care of the rest.
- Obstacle Navigation: Thanks to its Roller-Skirt, the Warrior glides over obstacles without interruption, ensuring continuous cleaning.
- Total Pool Coverage: Its programmed steering mechanism ensures the rebel powerfully drives around the whole pool without getting stuck and covering the tightest spaces.
- Handles Tough Environments Others Can’t: Its powerful turbines allow it to handle hard-to-clean pools that have extra exposure to leaves and sand.
- Doesn’t Clog: Its superior turbine design allows for clear passage of dirt and debris, avoiding clogging issues that are common for “normal” suction cleaners.
- Likes all Pumps: Its extra efficient hydraulics allows it to operate with dual and variable speed pumps with no fuss.
- Easy: It is remarkably easy to install, use and maintain. Its snap-open design allows quick, easy access for servicing
- Suits all Pools: Designed to operate in all pool sizes and shapes.Whether your pool is tiled, gunite, fiberglass, or vinyl, the Warrior adapts to different surfaces for an impeccable clean.
- Durable: Made in Europe using quality materials.
- 3 Years Warranty.
Features:
- Sure-Flow Turbine: This innovative design allows dirt and debris to pass easily, preventing clogs and ensuring consistent cleaning power.
- Quick-Release Latch: Simplifies maintenance, allowing for easy access and quick servicing.
- Two-Wheel Agility: Designed for speed and agility, the Warrior cleans fast, even in tight spaces.
- Programmed Steering Cycle: Guarantees comprehensive pool coverage, leaving no area untouched.
- Compact Design: The Warrior's sleek and modern aesthetics complement any pool setting.
- European Quality: Constructed using high-quality materials in Europe, ensuring durability and longevity.
Pentair Leaf Canister is designed to catch leaves, twigs and other debris before they reach your pump basket. It is made of durable Lexan and has a see-through housing that will let you see into the filter basket to determine when you need to clean it out. The sturdy basket will catch all types of debris and prevent potential problems that occur when your pump basket becomes too full to operate properly. The leaf trap is designed to allow the water to flow to the pump freely, even when it is full. The basket is easy to get into and clean.
Leaf Canister Features and Benefits:
- Sturdy debris basket
- Traps leaves and debris to prevent clogging of skimmer and pump basket
- See-through housing
- Reduces pump and filter maintenance
- Unique snap-open lid for quick easy emptying
Pentair Onga Warrior Box Contents:
- Turbine-Driven Pool Cleaner
- 10 x 1m Hose Sections
- 1 x Float
- 1 x Leader Hose
- 1 x Regulator Valve
- 1 x Flow Gauge
- 1 x Skimmer Fitting Kit
- 1 x Instruction Manual
Frequently Asked Questions:
Why is my Warrior cleaner not moving or moving too slowly?
- Use the included flow gauge to check suction or calculate the cleaner’s RPM (target 16–18 RPM). Turn the regulator valve clockwise to increase flow or counterclockwise to decrease flow until optimal. To calculate RPM, lift the cleaner just below the water surface (keeping it submerged), count the right wheel’s full rotations in one minute by watching the wheel hump pass the swivel assembly.
- Open the quick-release latch to inspect the Sure-Flow Turbine for debris and clear any blockages.
- Ensure the pump is primed. Check for air leaks (bubbles in the pump basket or return jets). Tighten hose connections and inspect the pump basket O-ring for wear.
- Backwash the filter if clogged and empty the pump and skimmer baskets to improve flow.
- Verify that the main drain and all suction lines are closed, except the line connected to the cleaner.
- Check for blockages in the filter, pump basket, or impeller.
- If flow remains low, your pump and filter system may be undersized. Contact us at Pool and Spa Warehouse.
Why does the Warrior cleaner’s right wheel not turn when rotated by hand?
- Open the quick-release latch, lift the top cover, and remove the turbine cover to check for debris in the turbine, gears, or drive shafts. Clear any obstructions and ensure the wheel rotates smoothly.
Why does the Warrior cleaner stay in one end of the pool?
- Use the flow gauge to check suction or calculate RPM (16–18 RPM). Adjust the regulator valve clockwise to increase flow or counterclockwise to decrease flow.
- Install the eyeball diverter on the return line to redirect water flow. Point it along the pool’s tile line, downward, or against the hose to avoid pushing the cleaner.
- Ensure the hose reaches the furthest point in the pool, plus one hose section and the leader hose (53.3 cm, marked with a red sticker). Remove excess hose sections from the middle to maintain float position.
- Position the hose float 63.5 cm above the cleaner on the second hose section.
- Check that the swivel assembly at the top of the cleaner rotates freely. Open the quick-release latch to clean it if debris is present.
Why does the Warrior cleaner climb the wall too much or climb out of the pool?
- Use the flow gauge to check suction or calculate RPM (16–18 RPM). Turn the regulator valve counterclockwise to reduce flow if it’s too high.
Why won’t my Warrior cleaner climb the pool walls?
- Check the cleaner’s tires for excessive wear, as worn tires reduce grip. Replace with genuine parts if needed.
- Use the flow gauge to check suction or calculate RPM (16–18 RPM). Adjust the regulator valve to ensure flow is within range.
- Ensure the leader hose (53.3 cm, marked with a red sticker) is connected to the cleaner’s swivel assembly.
- Position the hose float 63.5 cm above the cleaner on the second hose section.
Why does the Warrior cleaner stay on the main drain?
- Ensure the main drain is fully closed. Contact us at Pool and Spa Warehouse if assistance is needed.
- Confirm a main drain grate is installed to prevent suction issues.
Why does the Warrior cleaner fall on its side and take too long to recover?
- Position the hose float 63.5 cm above the cleaner on the second hose section.
- Ensure the leader hose (53.3 cm, marked with a red sticker) is connected to the cleaner’s swivel assembly.
- Verify the hose reaches the furthest point in the pool, plus one hose section and the leader hose. Remove excess sections from the middle.
- Install the eyeball diverter on the return line to redirect water flow, preventing it from pushing the hose. Point it downward or along the pool’s tile line.
How do I adjust flow to the cleaner with the flow gauge?
- Turn off the pool pump.
- Disconnect the cleaner from the leader hose and attach the flow gauge, keeping the hose submerged to avoid air suction.
- Turn on the pump.
- Turn the regulator valve clockwise to increase flow or counterclockwise to decrease flow until the flow gauge’s disc indicator settles between "Maximum" and "Minimum" flow (target 16–18 RPM equivalent).
- Turn off the pump, remove the flow gauge, and reconnect the cleaner.
- Lower the cleaner into the pool, let it settle on the floor, and turn the pump back on.
How do I calculate cleaner speed (RPM) without the flow gauge?
- While the cleaner is running, lift it just below the pool’s water surface, keeping it submerged to avoid air suction.
- Count the number of full rotations of the right wheel over one minute by watching the wheel hump pass the swivel assembly. This gives the revolutions per minute (RPM).
- Aim for 16–18 RPM for optimal performance.
- If below 16 RPM, turn the regulator valve clockwise to increase flow. If above 18 RPM, turn it counterclockwise to decrease flow. Repeat until within range.
How do I install the hose correctly?
- Wet the hose ends in pool water, then twist and push the female ends onto the male ends to connect sections securely.
- Attach the leader hose (53.3 cm, marked with a red sticker) to the cleaner’s swivel assembly.
- Place the hose float on the second hose section, 63.5 cm above the cleaner.
- Ensure the hose length reaches the furthest point in the pool (with the pump on, as it contracts), plus one hose section and the leader hose. Remove excess sections from the middle.
- Check all connections are snug.
What should I do if the Warrior cleaner is noisy?
- Open the quick-release latch to inspect the Sure-Flow Turbine and gears for debris or obstructions. Clear any blockages.
- Check the tires and Roller-Skirt for wear, as worn parts can cause vibrations. Replace with genuine parts if needed.
- Ensure the flow is within 16–18 RPM using the flow gauge or RPM calculation. Adjust the regulator valve if too high or low.
- Verify the hose is not kinked or coiled, as this can cause turbulence. Lay it flat in the sun to straighten if needed.
- If noise persists, contact us at Pool and Spa Warehouse.
How do I maintain my Warrior cleaner for optimal performance?
- Regularly open the quick-release latch to clean the Sure-Flow Turbine, removing debris to prevent clogs.
- Rinse the cleaner and hose with fresh water after use to remove chemicals and debris.
- Inspect the tires and Roller-Skirt for wear. Replace with genuine parts if needed.
- Store the hose flat and uncoiled in a shaded area to prevent kinks
