Speck BADU Stream II SwimJet System (Stream Pack w/ Remote Control)

Turn your pool into an aquatic water park at home

BADU Stream II turns your backyard pool—new or existing, concrete, fibreglass, or vinyl—into an aquatic water park for fitness, recovery, and family fun. It becomes a place to swim, relax, and play every day.

Two external 4.0 HP Speck pumps power compact, flush-mounted jet faces that keep your pool looking clean while delivering a smooth, adjustable counter-current. Aim the nozzles, set your intensity, and fine-tune aeration for clear-water laps or a lively, bubbly stream.

Built with corrosion-resistant materials and salt-ready to 5,000 ppm, the system pairs quiet external pumps with German-engineered reliability and a low-maintenance, in-pool parts-free design.

Why choose BADU Stream II

How does it work?

• Two external 4.0 HP Speck 21/80 pumps (up to 1,100 LPM each) supply the Stream II jet housings for a strong, smooth current.
• Adjustable jet nozzles let you set direction and intensity to match training, play, or recovery.
• An air-mixture valve lets you choose clear-water laps or add lively bubbles for fun and massage.
• Flush-mounted jet faces preserve wall space and keep the pool looking clean and open.
• External pump placement delivers a quieter swim and straightforward above-ground service by any pool technician.
• Suits new or existing pools in concrete, fibreglass, or vinyl.
• Salt-ready to 5,000 ppm with corrosion-resistant components.

Key Features

• Adjustable counter-current: Dual external 4.0 HP Speck 21/80 pumps (up to 1,100 LPM per pump) for training, play, and recovery.
• Directional jet control: Aim the recessed nozzles and set intensity to suit laps, walking-in-place, lap practice, or kids’ games.
• Air-mixture valve: Choose clear-water flow for focused swimming or add lively bubbles for play and hydro-massage.
• Flush-mounted jet faces: Preserve wall space and keep the pool looking clean and open.
• Compact, submerged counter-swim unit: Fits tight wall spaces and varied pool designs.
• In-pool parts-free design: External pumps provide a quieter swim and straightforward above-ground servicing by any pool technician.
• Salt-ready to 5,000 ppm: Corrosion-resistant materials and high-quality mechanical seals.
• High-throughput design: Large 6 L pump strainers and 80 mm suction/discharge ports for sustained performance.
• Fits most builds: Works in new or existing pools (concrete, fibreglass, or vinyl).
• Australian-ready: Aligns with local electrical and anti-entrapment requirements when installed by licensed professionals.
• Control options: Remote control included (Stream Pack w/ Remote); BADU® Connect app control on compatible setups.
• Accessory-ready: Supports the pulsating massage hose for targeted hydrotherapy and relaxation.
• Clean finish choices: Round (Black, Grey, White) and Square (Black, White) cover options.
• Configurable packages: Stream Pack or Stream Pack with Remote to match different usage preferences.

Swim. Relax. Play.

Adjust the current to match the moment—train hard, unwind gently, or keep the kids entertained—while your pool stays clean and uncluttered.

Technical Specifications

Warranty:

• Pumps: 2 years on the motor; 5 years on wet-end components (diffuser, impeller, casing, gland housing, mechanical seal).
• Jets & Switch Boxes: 12 months.
• Commercial applications: 12 months on Pumps, Jets & Switch Boxes.

Important: Pouring salt or chemicals directly into the skimmer will void the full warranty.

In the Box

• 2 × Speck BADU Stream II Jets with Round (Black, Grey, White) or Square (Black, White) covers
• 2 × Speck 21/80-32SG, single-phase 4.0 HP, 1,100 LPM pumps
• 4 × Barrel Unions
• 1 × Double Switch Box with Remote Control, 240 V / 15 A (single-phase)

Frequently Asked Questions

How do I choose the best location?

To keep a clear swim lane, position the SwimJet away from walls, benches, steps, and other features inside the pool.

• At least 1.37 m from any adjacent wall or obstruction (inside the pool).
• At least 2.44 m from any opposing wall or obstruction (inside the pool).

⏹ Ideal Locations
⏹ Alternative Locations
⏸ Unfavorable Locations

Recommended clear "swimming envelope": 2.44 m wide × 4.57 m long × 0.91 m deep.

Will it fit my pool?

Yes. A practical minimum is 4.2 m wide × 2.1 m long × 1 m deep, and many swimmers prefer a little extra length for comfort. It suits new or existing pools in concrete, fibreglass, or vinyl.

Can I add it to an existing pool?

Yes. The BADU Stream II can be incorporated into new builds or retrofitted later by licensed professionals.

How should I aim and adjust the jets?

For general lap swimming, aim the two nozzles slightly inward and upward so the streams meet about 1.2 m in front of the unit and just break the surface. Turn the nozzle clockwise to reduce flow; use the air regulator to add or reduce bubbles.

Where should the unit sit relative to the waterline?

For best performance, set the jet centre about 250 mm below the waterline. Mount the air regulator above water level.

How far can the pumps be from the jets, and what pipe size should I use?

Keep runs short where possible. As a guide: use 80 mm pipe up to about 6 m; 100 mm from 6–15 m; beyond that, consult your supplier/installer. Place the pump as close as local codes allow.

What are the electrical requirements?

Each 4.0 HP pump is single-phase 240 V and typically draws about 11.8 A. Plan two dedicated 15 A circuits (one per pump) and use a licensed electrician per local codes. The pneumatic air button operates reliably up to ~15 m.

Can the pump be installed below water level?

Yes. For flooded-suction installations, a flooded-suction pump variant is recommended; isolation valves are also recommended for maintenance.

How do I reduce bubbles when swimming into the flow?

Close the air regulator for clear-water laps. Open it to add aeration for play or massage.

Can I attach a massage hose?

Yes. A pulsating massage hose accessory can be fitted to a nozzle for hydro-massage. Follow the manual’s guidance and your physician’s advice for therapeutic use.

Should the SwimJet be plumbed into the pool filter system?

No. The SwimJet system should run on its own dedicated plumbing, separate from the filtration system.

How do I winterise the system?

Drain the pumps and store them dry and protected. Lower the pool water below the jet faces, blow out the lines, and fit the available winter covers before refilling to normal level.

Any safety guidance?

Always supervise children. Exercise within your limits and consult a physician before beginning a program or using massage accessories. Do not operate the unit if a safety cover is missing or damaged.