Aiper Scuba X1 Cordless Robotic Pool Cleaner w/ Caddy, WavePath Navigation & App Control. Floor, Walls, Waterline

Clean Higher, Shine Brighter

Bring commercial-grade cleaning performance to your backyard pool with Aiper Scuba X1, delivering a powerful 25,200 litres per hour through its dual-jet system. Engineered for full pool coverage, it scrubs floors, walls, and waterlines with precision for crystal-clear results.

WaveLine 2.0 introduces horizontal waterline scrubbing with constant contact, while WavePath 3.0 with Adaptive Path provides efficient routing across all pool shapes. A smart dual-stage filtration system (180 μm + 3 μm) captures everything from leaves and hair to fine sand, dust, and algae.

With up to 180 minutes runtime per charge, wireless charging, and app connectivity, Scuba X1 streamlines pool care and is built to perform in Australia’s tough conditions.

Key Features:

• High-Flow Dual-Jet Performance
  Twin jets sustain strong 25,200 LPH suction at depth, remove fine sand, small pebbles, and algae, and minimise debris escape versus single-jet units for faster, more thorough results.

• 4X Cleaning Efficiency
  Four brushless motors (quad-motor drive) and four high-efficiency brushes work in sync to pair powerful suction with maximum scrubbing—clearing fine sand and algae through to larger leaves across all pool surfaces.

• Smart Dual-Stage Filtration (180 μm + 3 μm)
  Multi-layer system captures everything from leaves and hair to fine sand, dust, and algae—holding up to 5 L per cycle.
  Heavy debris: run the 5 L top-load basket (180 μm) alone for maximum flow (ideal post-storm).
  Crystal-clear maintenance: add the 3 μm MicroMesh insert to trap fine particles between deep cleans.

• WavePath 3.0 Smart Navigation
  One system, three targeted behaviours for complete, efficient coverage on any pool shape:

Upgraded WavePath 3.0 – Cross-Pattern Floor Navigation: Cross-pattern routing boosts floor coverage and reduces misses versus basic S-paths, automatically steering around obstacles for edge-to-edge cleaning.

N-Pattern Wall Cleaning – Complete Vertical Coverage: N-shaped passes track up and down walls for consistent scrubbing from floor junction to waterline, eliminating missed bands and repeat loops.

Updated Adaptive Path – Intelligent Routing for Complex Floors: Adapts to bowl-shaped, diamond-shaped, and irregular bottoms to prevent dead loops and gaps, maximising coverage in uniquely designed pools.

• Efficient Waterline Scrubbing
  WaveLine 2.0 delivers industry-first horizontal waterline cleaning with constant contact along an approx. 50 mm band and up to 60-second lateral passes—lifting grime, sunscreen oils, and algae without manual brushing or harsh chemicals.

• Versatile 4+1 Cleaning Modes — Clean from Every Angle
  Cleans pools up to 200 m² / 70,000 L per charge with powerful, automated, energy-efficient maintenance.
  • Smart: cleans floor then walls, planning the path based on remaining battery
  • Floor: S-shaped floor-only (no wall cleaning)
  • Wall: N-pattern walls-only (no floor cleaning)
  • Waterline Mode: Horizontal passes along the waterline; automatically descends, switches walls or bypasses obstacles, then resumes.
  • Scheduled mode (app-only): lets you set periodic maintenance up to 3×/week to keep the pool clear between deep cleans.

• OmniSense Sensors Technology
  A 14-sensor suite with ultrasonic detection (up to ~6 m) anticipates obstacles, automatically reduces speed, and steers clear to prevent collisions—improving coverage, protecting pool surfaces and the device, and keeping cleaning efficient in complex pools.

• Extended Runtime & Durable Build for Australian Conditions
  Cleans for up to 180 minutes per charge—ideal for pools up to 200 m² / 70,000 L—with per-charge water turnover up to ~265,000 L (up to 10× the pool volume, mode/conditions dependent). Built to endure with 10× salt tolerance, 40× chlorine resistance, extreme temperature endurance, and 1,000,000 component tests.

• Smart Waterline Parking & Wireless Charging
  Automatically parks at the waterline for quick reach-and-grab retrieval — no hooks, no dragging. Then just dock-and-go on the wireless charging base for simple storage and fast turnaround.

• Seamless App Monitoring
  Schedule cleans, track progress in real time, view cleaning history, and receive maintenance alerts — all from the Aiper app.
  Note: underwater control and waterline retrieval require the optional HydroComm Pro or HydroComm Pure module.

• Optional App Control with HydroComm Series
  Add HydroComm for advanced control: real-time underwater communication and smart waterline retrieval (Pro and Pure). HydroComm Pro also provides water quality testing and chemical balance recommendations; HydroComm Pure omits water testing but retains underwater control and retrieval.

Water Quality Testing

Underwater Communication

Waterline Retrieval

• Any Pool. Any Shape. Any Condition.
  Built for in-ground pools up to 200 m² / 70,000 L. Delivers consistent results across rectangular, round, kidney, lap, freeform and irregular designs on concrete, pebblecrete, fiberglass, vinyl and tiled surfaces. WavePath 3.0 with Adaptive Path sustains coverage on bowl- and diamond-shaped floors.

• Included Dock-Compatible Charging Caddy
  The Charging Caddy is included. Mount the wireless dock on the caddy to charge while stored, keep the setup tidy, and allow convenient repositioning around the pool area. Your cleaner stays organised, protected, and ready for the next run.

Enjoy the Pool – Scuba X1 Handles the Cleaning

Relax, host, or jump in. Scuba X1 maintains floors, walls and the waterline while you enjoy the backyard. Smart modes and scheduled upkeep help keep the water looking clear between deep cleans and trim your weekend chores.

Technical Specifications:

In The Box:

• 1 × Aiper Scuba X1 cordless robotic pool cleaner with 180 μm filter basket
• 1 × Wireless charging dock
• 1 × DC charger
• 1 × Retrieval hook
• 1 × Extra 3 μm ultra-fine MicroMesh filter
• 1 × Scuba X Series Dock-Compatible Charge, Storage & Transport Caddy
• 2 × User manual

Please note: The caddy may ship separately.

Frequently Asked Questions:

Which filter should I use?

• Heavy debris / opening or post-storm: use the 5 L top-load basket (180 μm) on its own for maximum flow – ideal for leaves, twigs, and mud.
• Crystal-clear maintenance: add the 3 μm MicroMesh insert to trap fine sand, dust, pollen, and algae between deep cleans.

Pro Tip: Rinse the canister with fresh water after each use. For a deeper clean, use mild soap and a soft brush – or better yet, use the Robotic Filter Cleaner Spray to break down oils and fine debris.

What’s the battery run time?

Up to 180 minutes per charge (varies by mode and pool conditions).

What’s the battery capacity and how long does charging take?

7,800 mAh battery; about 4 hours from 0–100% on the dock.

Which pools is it suitable for?

Inground pools up to 200 m² / 70,000 L, including rectangular, round, kidney, bowl-shaped, freeform and irregular designs. Works across concrete, pebblecrete, fibreglass, vinyl and tiled surfaces.

How does Scuba X1 work with HydroComm Pro / Pure?

Pairing adds underwater communication (real-time status) and waterline retrieval. HydroComm Pro also provides water-quality testing and balance recommendations. (App control on land is available without HydroComm.)

Can it be used in a saltwater pool?

Yes – for pools with salinity up to 5,000 ppm.

What’s the suction rate and what debris can it pick up?

25,200 LPH flow; handles typical pool debris including fine sand, small pebbles, leaves and insects (up to ~20 cm in length).

What happens when the battery is low?

The LED turns solid red, the robot stops the current task and parks at the waterline for easy reach-and-grab retrieval.

It won’t turn on or charge – what should I try?

Fully charge on the dock and confirm the LED status; ensure ports and contacts are dry; use within 10–40 °C water. If the issue persists, please Contact Us.

It isn’t avoiding obstacles / keeps reversing

Wipe the sensor lenses (fog, water spots or fingerprints can affect detection). Restart the unit and retry. If needed, Contact Us.

Cleaning performance has dropped

Empty the 5 L basket, rinse the 180 μm basket and 3 μm insert, and check the propeller/impeller area for debris. Replace filters as needed. Still an issue? Contact Us.

What’s the warranty period?

24 months (subject to normal use and proof of purchase). For claims or assistance, please Contact Us.

Note!
Differences between Product Illustrations and Actual Products: The product illustrations (including product pictures, images and display contents) displayed on the website are for reference and illustrative purpose only. The actual products received by each customer may vary and differ slightly with the product illustrations in the aspects including but not limited to appearance, color, logo, dimension and size due to production batches, improvements, legal and regulatory requirements, country or region or other reasons. Please refer to the acutual products received. The final interpretation of product specifications and appearance belongs to Aiper.