Smart Water Monitoring & Underwater Control
Aiper HydroComm Pro combines 5-in-1 smart water monitoring with real-time underwater communication for the Scuba X series – giving you live water insights and in-water robot control from a single, solar-powered station. View readings in the Aiper app, switch between modes on the fly, and bring your cleaner to the surface with a tap.
Hour by hour, HydroComm Pro checks the five essentials – pH, ORP, EC, TDS, and temperature – and the app turns numbers into guidance with a simple pool health score, daily/weekly/monthly trends, and tailored dosing suggestions. App-guided calibration keeps setup simple, and the system adapts to chlorine, saltwater, bromine pools, and spas.
Underwater, HydroComm Pro keeps you connected: see live status and battery, switch between modes in real time, and use one-tap Recall for a quick, hook-free pickup at the waterline. Solar power with DC backup supports continuous operation, and compatibility with Aiper Scuba X1, Scuba X1 Pro, and Scuba X1 Pro Max makes setup seamless – drop it in and enjoy precise monitoring plus effortless control, all in one.
Drop it in once, top up power as needed, and enjoy 24/7 smart monitoring with real-time underwater control.
Key Features:
- 5-in-1 Water Testing
HydroComm measures pH, ORP, EC, TDS, and temperature for a complete view of your pool’s water.
- Real-Time Underwater Communication
Control your Scuba X cleaner while submerged – issue commands and stay connected in the Aiper app.
- One-Tap Retrieval, No Hooks Needed
When it’s time to empty the filter or pause cleaning, tap Recall in the app and your Scuba X cleaner surfaces at the waterline – easy to grab with no hooks required.
- Flexible Mode Switching
Switch between floor-only, wall-climb, or quick clean modes while the cleaner is underwater. Adjust instantly to your pool’s needs without stopping or restarting the cycle.
- Real-Time Status Monitoring
Check your robot’s current working state and battery level in the Aiper app, giving you live updates while it operates underwater.
- Real-Time Monitoring & Water Quality Score
Hourly checks stream to the Aiper app via Wi-Fi/Bluetooth, while a simple score summarizes overall water health and shows where to focus.
- Optimized Care Tips
Personalized guidance suggests dosing actions based on your live readings and history.
- Cleaning History Access
Track daily, weekly, and monthly trends to understand patterns and plan maintenance with clarity.
- App-Guided Calibration
Step-by-step prompts in the Aiper app make calibration fast and consistent with the included powders and cup.
- Near-Industrial Accuracy
±0.2 pH, ±30 mV ORP, ±5% EC/TDS, and ±0.5 °C temperature deliver confidence in every adjustment.
- Precision Probes
Dual probe architecture (Probe 01: pH/ORP/Temp; Probe 02: TDS/EC/Temp) captures stable readings quickly.
- Continuous Power
Solar charging keeps monitoring active in sunlight, with DC/battery backup for cloudy days.
- Broad Compatibility
Works across chlorine, saltwater, and bromine pools – as well as spas and hot tubs.
Monitor, Control, Enjoy
Hourly 5-in-1 readings, live dashboard, water quality score, and trends—your pool’s status at a glance.
Switch modes while the robot is underwater and tap
Recall to surface it for quick, hook-free pickup.
With live insight and in-water control, you spend less time managing and more time enjoying the pool.
Technical Specifications:
| |
HydroComm |
| Hardware & Connectivity |
| Power Supply / Battery |
14.4 V 2600 mAh (37.44 Wh) internal battery; solar-powered operation |
| Charging |
Input: 100–240 V, 50/60 Hz | Output: 16.8 V / 1 A (16.8 W) |
| Backup Power |
DC backup charging supported |
| Connectivity |
Wi-Fi 2.4 GHz; Bluetooth 5.0 |
| Water Testing |
| Testing Items |
pH, ORP, EC, TDS, Temperature |
| Monitoring Cadence |
Hourly (24/7 continuous monitoring) |
| Accuracy |
pH ±0.2; ORP ±30 mV; EC ±5%; TDS ±5%; Temperature ±0.5 °C |
| Testing Ranges |
pH 0–14; ORP 0–1000 mV; EC 0–12,000 µS/cm; TDS 0–6,000 mg/L; Temp 5–45 °C (41–113 °F) |
| Underwater Communication |
| Compatible Cleaners |
Aiper Scuba X1, Scuba X1 Pro, Scuba X1 Pro Max |
In The Box:
- 1 x HydroComm Pro
- 1 x Charger
- 6 x Calibration Powder for Probe 01
- 1 x Probe Calibration Cup
- 1 x Powder Mixer
- 1 x Storage Cover for Probe 01
- 1 x Perforated Protective Cover for Probe 01
- 1 x Lanyard
- 1 x User Manual
Frequently Asked Questions:
What does HydroComm Pro do, and how does it compare to HydroComm and HydroComm Pure?
HydroComm Pro combines 5-in-1 water monitoring (pH, ORP, EC, TDS, temperature) with real-time underwater communication for in-water control and one-tap retrieval. HydroComm focuses on 5-in-1 monitoring with app insights. HydroComm Pure focuses on underwater communication – status, mode switching, and one-tap retrieval – without water testing.
Aiper HydroComm Pro
- Smart Pool Monitor
- Water Quality Test
- App Control
- Solar Power
- Underwater Comm
Aiper HydroComm
- Smart Pool Monitor
- Water Quality Test
- App Control
- Solar Power
How often does it test the water?
It performs hourly checks for continuous insight (24/7 visibility in the app).
Does HydroComm work with all pool types?
Yes. Use it with chlorine, saltwater, bromine, and spa pools within the rated temperature range (5–45 °C).
How does it connect to the app?
HydroComm Pro supports Wi-Fi 2.4 GHz and Bluetooth 5.0. Initial setup can be done via Bluetooth or by scanning the device QR code in the Aiper app (iOS 12+ / Android 8.0+).
Is HydroComm Pro solar powered?
Yes. It solar-charges during sunlight and also supports DC plug-in charging (16.8 V/1 A). Charging time is about 3.5 hours.
How long does the battery last?
Typical battery pack life is up to 15 days per charge (varies with conditions), with solar extending runtime in sunlight.
Is HydroComm Pro waterproof?
The device is rated IPX8 for water protection. The charger is IPX3 and intended for indoor use.
How do I calibrate the probes?
The app prompts recalibration about every 60 days. Use the included calibration cup and powders, add purified water as instructed, and follow the in-app steps.
How long do the probes last?
Probe 01 (pH/ORP/Temp) and Probe 02 (TDS/EC/Temp) typically last about a year. The app will remind you when it’s time to refresh them for continued accuracy.
Where should I place HydroComm Pro?
Float it in the pool as directed and ensure a clear view of the sky to maximize solar charging. Use the lanyard when needed for secure placement.
Any storage tips during off-season?
Fully charge, power off, dry the device, and store between 5–45 °C in a cool, ventilated place. Keep Probe 01 moist using the storage cover with purified water so the sensor stays immersed. Recharge every six months in storage.
