Aiper Scuba X1 Pro Cordless Robotic Pool Cleaner w/ FlexiPath Navigation, Mapping, Intelligent Suction & App Control. Floor, Walls, Waterline, Elevated Platforms

Advanced Mapping, Maximum Cleaning

Step up to smarter pool care with the Aiper Scuba X1 Pro – combining 25,200 LPH dual-jet suction with intelligent mapping, adaptive suction control, and multi-level coverage. Built for inground pools up to 200 m², it uses OmniSense+ ultrasonic sensing and FlexiPath to map your pool in detail, delivering precise cross-pattern floor cleaning, Y-shaped wall paths, and targeted elevated-platform coverage.

Its turbidity sensor monitors water clarity in real time, automatically shifting between Eco and Max for efficient cleaning. With anti-fall protection, debris detection, and dual-stage filtration down to 3 μm, the X1 Pro keeps water crystal-clear with minimal effort.

Rated for Australian conditions, it runs up to 180 minutes per charge and recharges on the included wireless dock.

Key Features:

• Intelligent Suction Adjustment
  Turbidity sensor monitors water clarity in real time, automatically shifting between Eco and Max modes for optimised cleaning. Enjoy hands-free efficiency or switch modes manually via onboard controls or the Aiper App.

• OmniSense+ 360° Mapping
  World-first OmniSense+ ultrasonic sensing scans up to 8 m with 360° coverage, building an accurate map of pools up to 200 m², avoiding obstacles and refining paths for faster, more thorough cleans.

• FlexiPath Smart Navigation
  Tailored cleaning for different pool shapes. A quad-core engine analyses conditions and plans adaptive routes for spotless, edge-to-edge coverage:

Floor: Cross-Pattern – systematic lane-by-lane coverage; S-pattern revisit helps reduce potential missed areas.


Walls: Enhanced Y-Path – adapts to curved surfaces for stable climbing, superior cleaning, and fall prevention.

• Platform & Multi-Level Cleaning
  Depth and downward-facing sensors recognise steps, ledges, gentle slopes, and beach entries. In Platform Mode (set via the Aiper App), the X1 Pro adjusts its path to clean elevated areas while preventing falls from drop-offs.

• Effortless Waterline Scrubbing
  WaveLine 2.0 targets the waterline with greater reach, stability, and power – holding a steady ~50 mm above the surface to deliver up to 60-second horizontal passes for a pristine finish. Dual rear jets stabilise movement for wider, more consistent cleaning.



• High-Flow Dual-Jet Performance
  Twin jets sustain strong 25,200 LPH suction at depth to lift fine sand, small pebbles, and algae, maintaining consistent capture for faster, more thorough results.



• 4X Cleaning Efficiency
  Four brushless motors (quad-motor drive) and four high-efficiency brushes work in sync to pair powerful suction with maximum scrubbing—clearing fine sand and algae through to larger leaves across all pool surfaces.



• Smart Dual-Stage Filtration (180 μm + 3 μm)
  Multi-layer system captures everything from leaves and hair to fine sand, dust, and algae—holding up to 5 L per cycle.
  Heavy debris: run the 5 L top-load basket (180 μm) alone for maximum flow (ideal post-storm).
  Crystal-clear maintenance: add the 3 μm MicroMesh insert to trap fine particles between deep cleans.



• Multiple Cleaning Modes
  5+3 Cleaning Modes let you choose the path and fine-tune the power for any job.
  • 5 Cleaning Modes
    • Standard – cleans floor then walls; scrubs the waterline while wall-cleaning for a balanced full-pool cycle.
    • Floor – floor-only coverage using a cross-pattern route (no wall climb).
    • Wall – Y-shaped wall route for stable vertical cleaning (no floor pass).
    • Waterline – horizontal waterline scrubbing along the perimeter.
    • Scheduled (app-only) – set maintenance cleans up to 3×/week to keep water clear between deep cleans.
  • 3 Power Adjustments
    • Eco – energy-saving operation for longer runtime.
    • Auto – turbidity-based power that adapts in real time.
    • Max – peak suction for heavy debris and deep cleans.


• Seamless App Monitoring
  Control and monitor cleaning from the Aiper App – start/stop, pick modes, schedule maintenance (up to 3×/week), review cleaning history, receive key-component alerts, and apply OTA firmware updates.

Select Cleaning Modes

Switch between Standard, Floor, Wall, Waterline; set Scheduled (app-only)

Key Component Alerts

Get notified about battery, filter, and system status

OTA Upgrades

Keep performance current with over-the-air firmware updates

• Aiper HydroComm (Optional)
  Add HydroComm for advanced control. Both HydroComm Pure and HydroComm Pro enable underwater communication and smart waterline retrieval; HydroComm Pro additionally provides water quality testing and chemical balance recommendations. App control on land works without HydroComm.

Underwater Communication

Steer and manage the cleaner while submerged

Waterline Retrieval

Call the robot to the surface for easy pickup

Water Quality Testing

Pro model only; get readings and care guidance


• Extended Runtime & Durable Build for Australian Conditions
  Cleans for up to 180 minutes per charge—ideal for pools up to 200 m² / 70,000 L—with per-charge water turnover up to ~265,000 L (up to 10× the pool volume, mode/conditions dependent). Built to endure with 10× salt tolerance, 40× chlorine resistance, extreme temperature endurance, and 1,000,000 component tests.


• Smart Waterline Parking & Wireless Charging
  Automatically parks at the waterline for quick reach-and-grab retrieval – no hooks, no dragging. Then just dock-and-go on the wireless charging base for simple storage and fast turnaround.


• Any Pool. Any Shape. Any Condition.
  Built for in-ground pools up to 200 m² / 70,000 L (~20 m length). Delivers consistent results across rectangular, round, kidney, lap, freeform and irregular designs on concrete, pebblecrete, Quartzon, glass bead, fiberglass, vinyl and tiled surfaces. OmniSense+ 360° Mapping with FlexiPath adapts to complex contours – including bowl- and diamond-shaped floors – while Platform Mode tackles steps, ledges, gentle slopes and beach entries.



• Optional Scuba X Series Dock-Compatible Charge, Storage & Transport Caddy
  Create a portable charging station: place your existing Scuba X1 Pro wireless charging dock on the caddy base to charge and store in one spot, then roll it to where you need it. Also works without the dock as a transport caddy.



Enjoy the Pool – X1 Pro Handles the Cleaning

Relax, entertain, or jump in. Scuba X1 Pro maintains floors, walls, and the waterline while you enjoy the backyard. Intelligent mapping, adaptive suction, and scheduled upkeep help keep the water sparkling with minimal effort.

✔ Hands-free routine – Smart Mode cleans the floor then walls, scrubbing the waterline during wall-cleaning.

✔ Fresh waterline – WaveLine 2.0 delivers steady horizontal passes to keep the tile band looking sharp.

✔ Swim-ready on your schedule – Set Scheduled cleans in-app (up to 3×/week) for effortless maintenance.

✔ Quick pickup – Parks at the waterline for simple reach-and-grab retrieval.

✔ Dock-and-go storage – Wireless charging keeps the cleaner and dock together, ready for the next cycle.

✔ Fits your pool – OmniSense+ mapping and FlexiPath navigation cover common shapes and surfaces, including steps, ledges, gentle slopes, and beach entries.








Technical Specifications:

	Aiper Scuba X1	Aiper Scuba X1 Pro	Scuba X1 Pro Max
Ideal Pool Type	In-ground	In-ground	In-ground
Applicable Pool Surfaces	Concrete, Pebblecrete, Pebblecrete with Tiled Waterline, Quartzon, Glass Beads, Fiberglass, Vinyl, Tiles	Concrete, Pebblecrete, Pebblecrete with Tiled Waterline, Quartzon, Glass Beads, Fiberglass, Vinyl, Tiles	Concrete, Pebblecrete, Pebblecrete with Tiled Waterline, Quartzon, Glass Beads, Fiberglass, Vinyl, Tiles
Pool Size Coverage	200 m² (2150 sq.ft) 20 m (66 ft) in length	200 m² (2150 sq.ft) 20 m (66 ft) in length	300 m² (3230 sq.ft) 30 m (100 ft) in length
Pool Area Coverage	Floor/Walls/Waterline	Floor/Walls/Waterline Elevated Platforms/Slopes	Floor/Walls/Waterline/Surface Elevated Platforms/Slopes
IP Grade	IPX8	IPX8	IPX8
Motors	4 Motor	4 Motor	9 Motor
Sensors	14	26	40+
Scrubbing Type	Suction and Dual Active Front & Rear Rollers	Suction and Dual Active Front & Rear Rollers	Suction and Dual Active Front & Rear Rollers
Suction Power Flow Rate	25,200 LPH (6600 GPH)	25,200 LPH (6600 GPH)	32,000 LPH (8500 GPH)
Filter	Level-1: 180 μm Fine Filter Basket Level-2: 3 μm MicroMesh Ultra-fine Filter	Level-1: 180 μm Fine Filter Basket Level-2: 3 μm MicroMesh Ultra-fine Filter	Level-1: 180 μm Fine Filter Basket Level-2: 3 μm MicroMesh Ultra-fine Filter
Filter Basket	Top Load 5 L	Top Load 5 L	Top Load 5 L
Battery Life	Up to 180 Minutes	Up to 180 Minutes	Up to 300 Minutes/5 Hours - Floor Up to 600 Minutes/10 Hours - Skimming
Charging Time	4 Hours	5 Hours	4 Hours
Navigation	WavePath	FlexiPath 1.0	FlexiPath 2.0
Sensor Obstacle Avoidance	✓	✓	✓
Horizontal Waterline Cleaning	✓	✓	✓
Mapping	—	✓	✓
Anti-Fall Detection	—	✓	✓
Debris Detection	—	✓	✓
Quick Water Release	✓	✓	✓
Mobile App	✓	✓	✓
Underwater Communication	✓ (with Optional HydroComm Pro/Pure)	✓ (with Optional HydroComm Pro/Pure)	✓ (with Optional HydroComm Pro/Pure)
Smart Retrieval	✓ (with Optional HydroComm Pro/Pure)	✓ (with Optional HydroComm Pro/Pure)	✓ (with Optional HydroComm Pro/Pure)
Charging Dock	✓	✓	✓
Charging Caddy	Optional	Optional	✓




In The Box:

• 1 × Aiper Scuba X1 Pro cordless robotic pool cleaner with 180 μm filter basket
• 1 × Wireless charging dock
• 1 × DC charger
• 1 × Retrieval hook
• 1 × Extra 3 μm ultra-fine MicroMesh filter
• 1 × User manual



Frequently Asked Questions:

Which filter should I use?

• Heavy debris/opening or post-storm: use the 5 L top-load basket (180 μm) on its own for maximum flow – ideal for leaves, twigs, and mud.
• Crystal-clear maintenance: add the 3 μm MicroMesh insert to trap fine sand, dust, pollen, and algae between deep cleans.





Pro Tip: Rinse the canister with fresh water after each use. For a deeper clean, use mild soap and a soft brush – or better yet, use the Robotic Filter Cleaner Spray to break down oils and fine debris.

What’s the battery capacity and how long does charging take?

10,400 mAh battery; about 5 hours from 0–100% on the dock. Ensure the robot and contacts are dry before charging.

What water chemistry and temperature ranges are supported?

Operate in 10–40 °C water; pH 7.0–7.8; free chlorine up to ~4 ppm; salinity up to ~5,000 ppm

Do I need to remap my pool every time?

No. It maps your pool on first use. Before each clean it briefly relocates on the floor and then follows its optimised routes.

It won’t turn on – what should I try?

Charge fully on the dock, then try again. Confirm water temperature is 10–40 °C and that the charging contacts are dry and clean. Still having trouble? Contact Us.

It isn’t charging – what should I check?

Confirm the charger is powered; dry the robot and charging contacts; reseat it on the dock. Charging is disabled outside 10–40 °C. If the battery was stored for a long time, allow extra time on the dock. Need help? Contact Us.

It isn’t avoiding obstacles / keeps reversing

Wipe the sensor lenses (fog, water spots or fingerprints can affect detection), restart the unit and retry. If the issue persists, Contact Us.

It’s stuck on the main drain

Avoid running the pool drain while the robot is cleaning. If it catches briefly, it will typically free itself. If not, stop the cycle, remove the unit and restart away from the drain area.

It’s stuck at the waterline in Waterline Mode

If a small protrusion isn’t detected, the robot will sink within ~1 minute, switch walls or bypass, and continue the cycle. You can also retrieve it during waterline parking and restart.

Cleaning performance has dropped / the unit tilts

Empty and rinse the 5 L basket; pressure-rinse the 180 μm basket and 3 μm insert; check and clear the propeller/impeller area; ensure brushes roll freely. If the task ended early, recharge fully and run again. Ongoing issues? Contact Us.

Can I run it with my pool filter/skimmer concurrently?

No. Don’t operate the robot at the same time as other pool equipment (filter, cleaner or skimmer). Run them separately for best results.

How should I store it off-season?

Fully charge the battery; clean and dry the unit and port; close the port cover; store indoors in a cool, ventilated place; top-up charge every ~6 months. Avoid direct sun or extreme temperatures.



Note!
Differences between Product Illustrations and Actual Products: The product illustrations (including product pictures, images and display contents) displayed on the website are for reference and illustrative purpose only. The actual products received by each customer may vary and differ slightly with the product illustrations in the aspects including but not limited to appearance, color, logo, dimension and size due to production batches, improvements, legal and regulatory requirements, country or region or other reasons. Please refer to the acutual products received. The final interpretation of product specifications and appearance belongs to Aiper.