Maytronics Niya Eclipse 35 Cordless Robotic Pool Cleaner. Floor, Wall, Waterline
In stock
Order now while supplies last!
Satisfaction Guarantee
All products covered
Same Day Dispatch
On orders placed by 12pm AEDT
Price Match
Quick, simple & easy
Secure Shipping with Tracking
Guaranteed to arrive safely
Flat rate shipping
Per order Australia-wide
Free, Easy Returns
Hassle-free and convenient
Customer Service & Support
Dedicated call center
Super-Charged Cleaning. Complete Control.
The Niya Eclipse 35 makes pool care simple and stress-free. Fully cordless and powered by smart sonar navigation, it scans your pool to choose the most efficient cleaning path – giving you full coverage with minimal energy use.
Driven by a triple brushless motor system and active front & rear brushes, Eclipse 35 tackles floors, walls, and the waterline for crystal-clear results. When the cycle ends or the battery runs low, it self-parks at the pool edge for quick lift-out.
Lightweight and easy to handle, Eclipse 35 runs for up to 2.5 hours per charge and recharges in about 3.5 hours. Cordless freedom, smart navigation, and a DIY-replaceable battery make it a practical, dependable companion for everyday pool care.
Key Features
- Smart Sonar Navigation
Systematically scans the pool to follow precise, energy-efficient paths – more cleaning, less charging.
- Cordless Freedom
Charge, place, and clean – no cable handling. Designed for full-coverage agility in residential pools.
- Full Cleaning Coverage
Active front and rear brushes scrub the floor, walls, and waterline for a thorough clean.
- Cleaning Mode Customisation
Choose from Eco, Standard, Floor-only, or Wall-only modes – including Eco Mode, which keeps your pool tidy all week with multiple short floor cycles on one charge.
- Triple Brushless Motor System
Dual-drive motors for agile movement plus a dedicated suction motor for strong debris pickup.
- Self-Parking
Automatically parks at the pool edge when a cycle finishes or the battery is low – easy retrieval every time.
- DIY-Replaceable Battery
Service at home for convenient, cost-effective maintenance.
- Fast Charging & Long Runtime
About 3.5 hours to recharge; up to 2.5 hours of cordless cleaning per run.
- Fine Filtration
Top-load basket with 150 µm mesh for reliable capture and quick access.
- Smart & Practical Design
Bluetooth (updates only), lightweight 8.7 kg body, optimised for pools up to 10 m in length.
Effortless Pool Care. Every Time.
Smart sonar guidance, cordless freedom, and everyday simplicity – Niya Eclipse 35 gives your pool a complete clean while you focus on what matters most.
✔ Cordless freedom – Charge, drop in, and clean.
✔ Smart sonar navigation – Efficient, systematic paths.
✔ Full coverage – Floor, walls, and waterline.
✔ Self-parking – Stops at the edge for easy lift-out.
✔ Fast recharge – About 3.5 hours.
✔ Up to 2.5 hours runtime – Thorough cleaning each cycle.
Eco Mode – Short floor cycles to keep things fresh all week.
Standard – Full floor-to-waterline coverage.
Floor-only – Quick daily tidy before a swim.
Wall-only – Targeted vertical refresh.
Technical Specifications
| Eclipse 35 | Sonar F3 | |
|---|---|---|
| Types of Inground Pools | ||
| Pool Type | Inground residential pools | |
| Surfaces | Concrete, Pebblecrete, Pebblecrete with Tiled Waterline, Quartzon, Glass Beads, Fiberglass, Vinyl, Tiles | |
| Shapes | Rectangular, Oval, Free Shape, Flat, Gentle Slope, Composite Slope, Diamond Shape | |
| Pool Length | Up to 10 m | |
| Water Depth | 0.4–2.5 m | |
| Cleaning Coverage | Floor, walls, waterline | |
| Performance | ||
| Navigation | Smart sonar-powered scanning | |
| Cleaning Modes | Eco / Standard / Floor-only / Wall-only | Standard |
| Cleaning Cycle Time | Up to 2.5 hours | Up to 2 hours |
| Charge Time | 3.5 hours | 3–3.5 hours |
| Motor System | Triple brushless (dual-drive + suction) | |
| Ease of Use | ||
| Cordless Operation | Yes | |
| Self Parking | Parks at pool edge for quick lift-out | |
| Filter Access | Top-load basket, 150 µm mesh | Top-load basket, 200 µm mesh |
| Battery Serviceability | DIY replaceable battery | |
| Connectivity | Bluetooth (updates only) | |
| Technical Specifications | ||
| Lithium Battery | 7,800 mAh | |
| Power Adapter / AC Input | 100–240 VAC, 50–60 Hz | |
| Power Adapter / DC Output | 26 V / 28 V, 2.3 A | |
| Power Adapter / Rated Power | 59.8 W / 64.4 W | |
| Dimensions (L × W × H) | 424 × 384 × 250 mm | |
| Net Weight | 8.7 kg | |
| Protection Ratings | Robot IPX8, Charger IP67 | Robot IPX8, Charger IP54 |
| Storage Temperature | 0–40 °C | |
| Water Conditions | Chlorine max 4 PPM Temperature 5–35 °C pH 7.0–7.8 NaCl max 5000 PPM | |
| Warranty | 24 months: Charger, Battery, Motor 12 months (accessories / wear parts): Filters, Brushes, Tracks, Plastics, Gears & Pulleys 30-Day Satisfaction Guarantee* | |
* Our 30-Day Satisfaction Guarantee lets you return or exchange within 30 days for any reason – even after use. Learn more.
In the Box
- Niya Eclipse 35 Cordless Robotic Pool Cleaner
- Top-load 150 µm filter basket (1.6 L capacity)
- Power adapter and charging cable
- Retrieval hook attachment
- User manual and quick start guide
- Warranty card
Frequently Asked Questions
What are the optimal water conditions for using my Niya robot?
For best performance, maintain water temperature between 5–35°C, pH between 7.0–7.8, chlorine up to 4 PPM, and salinity up to 5000 PPM.
How do I insert and remove my Niya from the pool?
- Charge the robot fully and press the power button to start.
- Place it gently in the pool and let it begin cleaning.
- When finished, use the hook to guide it to the surface and lift it out by hand.
- Press and hold the power button to turn it off.
Can I swim while Niya is cleaning the pool?
It’s best to wait until the cleaning cycle is complete before swimming. Once finished, remove the robot from the pool and rinse it with clean water.
What does it mean when the cleaner lights up with a purple LED indicator?
The purple LED indicator means the cleaner is stuck. Remove the cleaner from the water, and once the blue LED starts flashing, place it back into the pool to continue the cleaning process.
Why does the cleaner automatically switch off after a few hours of charging?
The device automatically shuts off about 10 minutes after reaching a full charge to protect the battery and extend its lifespan.
My Niya isn’t charging or shows an error – what should I do?
Ensure the robot is turned off and clear of debris. Try another power outlet, check that the charger and port are dry, and allow a full 3-hour charge. If the issue persists, please contact us.
Why is the robot not cleaning effectively?
If the pool is heavily soiled, the robot may quickly collect a large amount of debris. Check and clean the filter basket to restore full performance.
Why can't the cleaner clean the wall or waterline?
If the filter basket is full, suction strength may decrease, preventing the cleaner from climbing or scrubbing effectively. Empty and rinse the filter before restarting the robot.
Why can’t the cleaner climb the wall?
The most common cause is debris buildup in the filter basket or impeller area. First, remove and clean the basket. If the issue persists, clean the impeller following the steps below.
- Turn off the robot by pressing and holding the button until the voice says "Goodbye."
- Ensure the metallic out-of-water sensors are completely dry using a towel or tissue.
- Remove the two screws securing the impeller cover.
- Carefully remove debris from the impeller area with a tweezer or similar tool.
- Reinstall the cover and screws securely before restarting the robot.
How should I store my Niya robot during the off-season?
Empty all water and let the robot dry for two days. Clean and dry the filter basket, then store the robot indoors away from sunlight, rain, or frost at 0–40°C. Recharge every three months to protect battery health.
Where can I find the serial number?
The serial number label is located on the bottom of the robot. It can also be found in the brochure inside the box. Use the last 10 digits when registering your warranty.
What if I’m not satisfied with my purchase?
Shop with confidence. Every cleaner is covered by our 30-day satisfaction guarantee – you have 30 days to return or exchange it for any reason. Read the full policy.
Note!
Differences between Product Illustrations and Actual Products: The product illustrations (including product pictures, images, and display content) are for reference only. Actual products may vary slightly in appearance, colour, logo, dimensions, or features due to production batches, continuous improvements, legal or regulatory requirements, and regional differences. Please refer to the actual product received. Final interpretation of product specifications and appearance belongs to Maytronics.
| SKU | 07-009-0041 |
|---|---|
| Barcode | 07.009.0041 |
| Package Length | 45 cm |
| Package Width | 41 cm |
| Package Height | 27 cm |
| Warranty | 2 Years, 1 Year on Wearable Parts |
| Brand | Maytronics |
| Model | Eclipse 35 |
| Product Type | Robotic Pool Cleaner |
| Shipping Type | Standard |
| Cleaner Type | Robotic Cleaner |
| Suitable Pool Type | Inground |
| Cable length (metres) | Cable Free |
| Swivel | No |
| Maximum Pool Size | Up to 10 metres in length |
| Suitable Pool Surface | Concrete, Pebblecrete, Pebblecrete w/ Tiled Waterline, Quartzon, Glass Beads, Fibreglass, Vinyl Lined, Tiled |
| Leaf Handling Capacity | Moderate Amounts |
| Leaf Size Capability | Medium |
| Type Of Debris | Medium (Nuts, Twigs, etc.) |
| Cleaning Cycle | 4 Cleaning Modes: Eco / Standard / Floor-only / Wall-only |
| Can Handle Sand | Yes |
| Can Handle Fine Dust | No |
| Caddy | No |
| Filter Capacity | 1.6L |
| Filtration Type | Canister |
| Filtration Porosity | 150 µm Fine Net Basket |
| Weight | 8.7kg |
| Wall Climber | Yes |
| Cleaning Area | Floor, Walls, Waterline |
| Remote Control | No |
| Energy Consumption | Battery Capacity: 7800mAh |
| Bluetooth | Yes |
| Smart Phone Control | No |
Shipping
Same-day dispatch applies to orders received by 12.00 pm (AEST) during business days. Orders received after 12.00 pm and on weekends or public holidays will be dispatched on the next business day.
Delivery fees are $19.95 flat-rate per order Australia-wide, no matter how many products are in it. Orders containing bulky items like sand filters, acoustic boxes, heat pumps, pool covers, and pool slides may incur additional fees as they require specialized carriers.
Below are the estimated time to arrival in business days once an order is shipped.
| Destination | Sydney | NSW | VIC | QLD | SA | WA/NT |
|---|---|---|---|---|---|---|
| Business Days | 1 - 2 | 2 - 4 | 2 - 4 | 2 - 4 | 3 - 4 | 5 - 6 |
Rural and remote addresses, where delivery is not provided every day, may take longer.
Returns
Satisfaction Guarantee: If you are not satisfied with a product for any reason, you are welcome to return it to us for a full refund or exchange within 30 days of the purchase date - even if you have used the product. Returns are free, and we will cover return shipping.
We take full responsibility for the safe arrival of the products that you order from us. We will replace at our expense any product that arrives faulty, damaged during transit, or is the incorrect product. Click here for details
If you have any questions about our shipping policy or our return policy, please contact us on 1300 766 619 or through our contact us form.