Super-Charged Cleaning. Complete Control.
The Niya Sonar F3 transforms pool care into a simple, effortless routine. Fully cordless and powered by smart sonar navigation, it scans your pool to determine the most efficient cleaning path – giving you full coverage with minimal energy use.
With its triple brushless motor system and dual active brushes, the Sonar F3 scrubs every surface – from the floor to the walls and waterline – leaving your pool crystal clear and ready to enjoy. When it’s done, the self-parking feature brings the cleaner to the pool edge for quick lift-out.
Lightweight and easy to handle, the Niya Sonar F3 runs up to two hours on a single charge and recharges quickly in just over three. Its cordless operation, smart navigation, and user-replaceable battery make it a practical and dependable cleaning companion for everyday pool care.
Key Features
- Smart Sonar Navigation
Smart sonar guidance systematically scans the pool for precise, energy-efficient paths for more cleaning and less charging.
- Cordless Freedom
Fully cordless operation: charge, drop in, and clean with no cable handling.
- Full Cleaning Coverage
Front and rear active brushes scrub floors, walls, and the waterline.
- Cleaning Mode Customisation
Choose Standard, Floor-only, or Wall-only to focus cleaning where it’s needed most.
- Triple Brushless Motor System
Dual-drive motors for agile movement plus a dedicated suction motor for debris pickup.
- Self Parking
Automatically parks at the pool edge when the cycle finishes or the battery is low for easy retrieval.
- DIY Replaceable Battery
User-replaceable battery for convenient, cost-effective maintenance.
- Fast Charging and Long Runtime
Recharges in about 3–3.5 hours and runs for up to 2 hours.
- Fine Filtration System
Top-load 200 µm filter basket for quick access and reliable debris capture.
-
Smart & Practical Design
Bluetooth connectivity for quick updates, lightweight 8.7 kg body for easy handling, and optimised performance for residential pools up to 10 metres in length.
Effortless Pool Care. Every Time.
Smart sonar guidance, cordless freedom, and everyday simplicity – Niya Sonar F3 gives your pool a complete clean while you focus on what matters most.
✔ Cordless freedom – Charge, drop in, and clean with no cables or setup.
✔ Smart sonar navigation – Scans your pool for the most efficient cleaning path.
✔ Full coverage – Scrubs floor, walls, and waterline with dual active brushes.
✔ Self-parking – Stops at the pool edge when finished for easy lift-out.
✔ Fast recharge – Ready to run again after about 3–3.5 hours.
✔ Up to 2 hours runtime – Thorough, reliable cleaning in every cycle.
Quick Daily – Floor-only mode for a light clean before a swim.
Focused Clean – Wall-only mode to refresh vertical surfaces.
Complete Clean – Standard mode for full floor-to-waterline coverage.
Technical Specifications
|
Sonar F3 |
Eclipse 35 |
| Types of Inground Pools |
| Pool Type |
Inground residential pools |
| Surfaces |
Concrete, Pebblecrete, Pebblecrete with Tiled Waterline, Quartzon, Glass Beads, Fiberglass, Vinyl, Tiles |
| Shapes |
Rectangular, Oval, Free Shape, Flat, Gentle Slope, Composite Slope, Diamond Shape |
| Pool Length |
Up to 10 m |
| Water Depth |
0.4–2.5 m |
| Cleaning Coverage |
Floor, walls, waterline |
| Performance |
| Navigation |
Smart sonar-powered scanning |
| Cleaning Modes |
Standard / Floor-only / Wall-only |
Eco / Standard / Floor-only / Wall-only |
| Cleaning Cycle Time |
Up to 2 hours |
Up to 2.5 hours |
| Charge Time |
3–3.5 hours |
3.5 hours |
| Motor System |
Triple brushless (dual-drive + suction) |
| Ease of Use |
| Cordless Operation |
Yes |
| Self Parking |
Parks at pool edge for quick lift-out |
| Filter Access |
Top-load basket, 200 µm mesh |
Top-load basket, 150 µm mesh |
| Battery Serviceability |
DIY replaceable battery |
| Connectivity |
Bluetooth (updates only) |
| Technical Specifications |
| Lithium Battery |
7,800 mAh |
| Power Adapter / AC Input |
100–240 VAC, 50–60 Hz |
| Power Adapter / DC Output |
26 V / 28 V, 2.3 A |
| Power Adapter / Rated Power |
59.8 W / 64.4 W |
| Dimensions (L × W × H) |
424 × 384 × 250 mm |
| Net Weight |
8.7 kg |
| Protection Ratings |
Robot IPX8, Charger IP54 |
Robot IPX8, Charger IP67 |
| Storage Temperature |
0–40 °C |
| Water Conditions |
Chlorine max 4 PPM
Temperature 5–35 °C
pH 7.0–7.8
NaCl max 5000 PPM |
| Warranty |
24 months: Charger, Battery, Motor
12 months (accessories / wear parts): Filters, Brushes, Tracks, Plastics, Gears & Pulleys
30-Day Satisfaction Guarantee*
|
* Our 30-Day Satisfaction Guarantee lets you return or exchange within 30 days for any reason – even after use. Learn more.
In The Box
- Niya Sonar F3 Cordless Robotic Pool Cleaner
- Top-load 200 µm filter basket (1.6 L capacity)
- Power adapter and charging cable
- Retrieval hook attachment
- User manual and quick start guide
- Warranty card
Frequently Asked Questions
What are the optimal water conditions for using my Niya robot?
For best performance, maintain water temperature between 5–35°C, pH between 7.0–7.8, chlorine up to 4 PPM, and salinity up to 5000 PPM.
How do I insert and remove my Niya from the pool?
- Charge the robot fully and press the power button to start.
- Place it gently in the pool and let it begin cleaning.
- When finished, use the hook to guide it to the surface and lift it out by hand.
- Press and hold the power button to turn it off.
Can I swim while Niya is cleaning the pool?
It’s best to wait until the cleaning cycle is complete before swimming. Once finished, remove the robot from the pool and rinse it with clean water.
What does it mean when the cleaner lights up with a purple LED indicator?
The purple LED indicator means the cleaner is stuck. Remove the cleaner from the water, and once the blue LED starts flashing, place it back into the pool to continue the cleaning process.
Why does the cleaner automatically switch off after a few hours of charging?
The device automatically shuts off about 10 minutes after reaching a full charge to protect the battery and extend its lifespan.
My Niya isn’t charging or shows an error – what should I do?
Ensure the robot is turned off and clear of debris. Try another power outlet, check that the charger and port are dry, and allow a full 3-hour charge. If the issue persists, please contact us.
Why is the robot not cleaning effectively?
If the pool is heavily soiled, the robot may quickly collect a large amount of debris. Check and clean the filter basket to restore full performance.
Why can't the cleaner clean the wall or waterline?
If the filter basket is full, suction strength may decrease, preventing the cleaner from climbing or scrubbing effectively. Empty and rinse the filter before restarting the robot.
Why can’t the cleaner climb the wall?
The most common cause is debris buildup in the filter basket or impeller area. First, remove and clean the basket. If the issue persists, clean the impeller following the steps below.
- Turn off the robot by pressing and holding the button until the voice says "Goodbye."
- Ensure the metallic out-of-water sensors are completely dry using a towel or tissue.
- Remove the two screws securing the impeller cover.
- Carefully remove debris from the impeller area with a tweezer or similar tool.
- Reinstall the cover and screws securely before restarting the robot.
How should I store my Niya robot during the off-season?
Empty all water and let the robot dry for two days. Clean and dry the filter basket, then store the robot indoors away from sunlight, rain, or frost at 0–40°C. Recharge every three months to protect battery health.
Where can I find the serial number?
The serial number label is located on the bottom of the robot. It can also be found in the brochure inside the box. Use the last 10 digits when registering your warranty.
What if I’m not satisfied with my purchase?
Shop with confidence. Every cleaner is covered by our 30-day satisfaction guarantee – you have 30 days to return or exchange it for any reason.
Read the full policy.
Note!
Differences between Product Illustrations and Actual Products: The product illustrations (including product pictures, images, and display content) are for reference only. Actual products may vary slightly in appearance, colour, logo, dimensions, or features due to production batches, continuous improvements, legal or regulatory requirements, and regional differences. Please refer to the actual product received. Final interpretation of product specifications and appearance belongs to Maytronics.
