- Complete Cleaning Coverage: The Rebel 2 effortlessly gets into tight corners, tackles 90-degree floor-to-wall angles, and climbs walls all the way to the waterline, ensuring thorough and uninterrupted pool cleaning.
- Built for All Pools: Delivers top performance on gunite, vinyl, fiberglass, and tile pool surfaces, regardless of size or shape.
Upgrade your pool-cleaning game with the Pentair Rebel 2—where style, power, and reliability meet to deliver unmatched results.
Product Components:
- Steady-Grip Tire Traction with new, added tread for outstanding maneuverability in tight spaces
- Sure-Flow Turbine design captures large and small debris for clog-free cleaning
- Quick-Release Latch allows for fast and easy top access
- Dual-action roller skirt maneuvers up and over obstacles for uninterrupted cleaning
- Re-designed bearings allow for up to 26 percent faster operation and shorter clean times*.
*compared to previous models
Warranty:
- 3-Year Limited Warranty: Includes a replacement head during the first 12 months and replacement parts from 12–36 months. Excludes normal wear and tear (e.g., tires).
In The Box:
- Rebel cleaner body
- Hose float
- Threaded Adaptor
- Reducer Cone
- Regulator valve
- Elbow
- Flow gauge
- Hose Set - 11 Sections:
- 10 x Standard Hoses
- 1 x Leader Hose
- User Manual
Enhance the performance of your Rebel 2 with the Onga/Pentair Leaf Canister—a reliable, durable solution for trapping debris before it reaches your pump basket.
Features and Benefits:
- Captures leaves and debris, preventing clogging in the pump and skimmer baskets.
- Easily monitor when the basket needs cleaning without disassembly.
- Simplifies emptying for quick and hassle-free maintenance.
- Minimizes strain on your pump and filter, extending their lifespan.
- Attaches seamlessly to suction pool cleaner hoses, enhancing overall efficiency.
Frequently Asked Questions
Why is my Rebel 2 not moving or moving too slowly?
The Rebel 2 may not move or may move slowly if the water flow is too low, the filter system requires cleaning, or debris is obstructing the turbine. Confirm the cleaner is operating at the correct RPM, check for blockages inside the cleaner and in the filtration system, and ensure the pump is fully primed.
What RPM or flow rate does the Rebel 2 need for proper operation?
The Rebel 2 operates correctly at 16–18 RPM. Use the flow gauge supplied with the cleaner or manually count the wheel rotations per minute. Adjust the regulator valve until the cleaner falls within the recommended RPM range.
How do I adjust the regulator valve or return line to improve cleaner performance?
If the cleaner’s movement needs improvement, adjust the regulator valve to increase or decrease suction until the RPM is within the correct range. You can also redirect return jets away from the cleaner hose or down the wall so the return flow does not interfere with the cleaner’s path.
Why does my Rebel 2 stay in one area of the pool?
The cleaner may stay in one area if the flow is insufficient, if return jets are pushing it back, or if the hose is too short. Confirm the cleaner is running at the correct RPM, check that the hose length reaches the furthest point of the pool plus one extra section and the leader hose, and adjust the return line direction if required.
Why won’t the Rebel 2 climb the walls or reach the waterline?
If the cleaner will not climb walls, inspect the tyres for wear and replace them if the tread is worn down to the bottom of the grooves. Verify that the leader hose is installed at the cleaner end and that the hose float is positioned correctly. Make sure the cleaner is operating at the recommended RPM range.
Why does the Rebel 2 climb too much or climb out of the pool?
Excessive climbing usually occurs when the suction is too strong. Reduce the flow by opening the regulator valve or adjusting the filtration valves until the cleaner moves normally across the pool floor and lower walls without climbing out.
What should I do if the cleaner keeps getting stuck on the main drain?
If the cleaner becomes stuck on the main drain, make sure the main drain is fully closed for cleaner operation and that it is fitted with a compliant safety grate. Adjust the suction and return jets if necessary to help guide the cleaner away from the drain.
What hose length and hose float position does the Rebel 2 require?
The hose must reach from the connection point to the furthest point in the pool, plus one additional hose section and the leader hose. The hose float should be installed on the second hose section, positioned approximately 63.5 cm above the cleaner, to support correct balance and movement.
How do I remove debris stuck in the turbine or internal gears?
To remove debris, switch the pump off, lift the cleaner from the pool, and disconnect it from the hose. Open the top cover, remove the turbine cover, and carefully clear any obstructions from the turbine, gears, and swivel assembly. Refit the turbine cover and top cover securely before returning the cleaner to the water and restarting the pump.
When should I replace the Rebel 2 tyres, and how can I tell if they’re worn?
Rebel 2 tyres should be replaced when the outer surface has worn down to the bottom of the tread grooves. Worn tyres reduce traction and can prevent the cleaner from climbing walls or navigating the pool properly. For best performance, use genuine Pentair replacement tyres.
Can I leave the Rebel 2 in the pool at all times?
The Rebel 2 can remain in the pool during normal filtration and cleaning cycles. Remove the cleaner from the pool during shock dosing or when chemical levels are temporarily raised, and store the hose straight and out of direct sunlight to minimise kinking and UV damage.
Is the Rebel 2 safe to use in vinyl, fibreglass, tile, and concrete pools?
The Rebel 2 is suitable for use in concrete, fibreglass, vinyl-lined, and tiled pools. Before use in older or worn vinyl-lined pools, check for signs of brittleness, fading, or damage, as compromised surfaces may be more prone to marking from any automatic cleaner.
Why is the cleaner falling onto its side or taking too long to recover?
If the cleaner falls onto its side, confirm the hose float is in the correct position and that the leader hose is fitted to the cleaner end. Check that the hose length is correct and not coiled, and adjust the return jets if they are pushing against the hose or cleaner.
How do I install the Rebel 2 using a skimmer or vacuum port correctly?
For skimmer installation, turn the pump off, close the main drain, and connect the hose to the skimmer plate using the supplied adaptor, regulator valve, and elbow. Ensure all connections are fully submerged and secure before turning the pump back on. For a dedicated vacuum port, fit the appropriate safety vac-port fitting, connect the hose, and adjust the regulator valve for correct flow.
Does the Rebel 2 work with variable-speed and low-flow pumps?
Yes. The Rebel 2 is hydraulically engineered to operate effectively with variable-speed and low-flow pumps. Set the pump speed to provide sufficient suction, then fine-tune with the regulator valve until the cleaner reaches the recommended RPM range.
What maintenance does the Rebel 2 require to keep performing well?
Routine maintenance includes regularly checking for debris inside the cleaner, inspecting and replacing worn tyres, and confirming the swivel and internal gears move freely. Maintain the pool’s filtration system by cleaning baskets and backwashing or cleaning the filter as needed to ensure consistent flow and reliable cleaner performance.
