50mm

…It includes both 40mm and 50mm glue-in pipe unions, O-rings, and lock nuts, ensuring a tight and leak-free seal with standard pool plumbing. In the Box: 2 × Glue-In Pipe Union – 50mm / 2" (950920) 2 × Glue-In Pipe Union – 50/40mm Reducer (950918) 2 × Lock Nut – Union 50mm (950919) 2 × O-Ring (70003)… Learn More

Vortex Spas™ 2"(50mm) Diverter.Comes complete with Body, Flange, Locking Ring, Diverter Gate and O’ring’s, Cap and O’ring, and Handle.Commonly used on O2 / Vortex Spas™.  This product is compatible with Vortex Spas™ equipment. “Vortex®” is a registered trademark of its respective owner.SpaCraft is… Learn More

Sensapool SF Pump 50mm Barrel UnionReplacement barrel union for SF100/150/200.Comes with barrel union nut, tail and o'ring.   Learn More

Emaux 50mm Class 9 Slip Fit / Push In Safety SuctionThis suction is designed to work with Class 9 50mm pipe only.The rear spigot pushes into a piece of 50mm pipe.Product SpecificationsFace Diameter: 182mmHeight: 52mm (from bottom of spigot)Max Flow Rate: 348lpm Learn More

Jazzi Spas 50mm Diverter Cap Only - BlackCap diameter is approximately 125mm. Learn More

Oasis Platinum Black 2'' 3 Way Diverter One 50mm water inlet & two 50mm water outlets. Comes complete with White Body, Flange, Locking Nut, Diverter Gate, Orings, Flat Cup Holder Cap/Handle.Requires an 80mm hole. Learn More

Oasis Platinum Grey 2'' 3 Way Diverter One 50mm water inlet & two 50mm water outlets. Comes complete with White Body, Flange, Locking Nut, Diverter Gate, Orings, Flat Cup Holder Cap/Handle.Requires an 80mm hole. Learn More

50mm(2") Arcadia Directional Jet - Grey.This jet was used on Arcadia Spas - Post 2013. Learn More

Spanet SV 50mm Heater O-Ring Learn More

CMP/Sapphire 2"(50mm) 3 Way Diverter Valve.One 50mm water inlet and two 50mm water outlets.Comes complete with Body, Diverter Gate, Orings, Cap and Handle.Flange / Wall fitting sold separately C-25048-089-200Requires a 80mm hole.Has a stainless steel cap and graphite grey handle. Learn More

50mm 90deg White PVC Street ElbowPart No. PFSE5090Rated to PN18 (working pressure rating 18)Solvent welded (glued)Socket on one end, spigot on the other.Dimensions: 106mm x 96mm x 70mmStreet elbows allow direct joining to another fitting without using a connecting piece of pipe.50mm 45deg street… Learn More

Vortex Spas™  50mm(2") Directional Jet  This product is compatible with Vortex Spas™ equipment. “Vortex®” is a registered trademark of its respective owner.SpaCraft is not affiliated with or endorsed by the trademark owner.The use of the trademark is for identification and compatibility purposes… Learn More

Jazzi Spas 50mm 3 Way Diverter - Black.Includes the following: Body, Flange, Locking Ring, Diverter Gate, Cap and Handle.Requires an 83mm hole. Learn More

Balboa 50mm 3way Crescent Diverter. Comes complete including: Body, Flange, Locking Ring, Diverter Gate, Cap and Handle. Requires a 80mm hole. Learn More

20mm (2") Class 09 PVC Pressure Pipe - 6m Length* Rated to PN09 (working pressure rating 9). This pipe is used in applications where pipework is subjected to pressure. Part No. P50MMC09-6M Dimensions: 20x20x6000mm (6m) *Please note: these are cut down to 3x2 metre lengths due to freight surcharges. Learn More

Balboa/Hydroair 50mm 3 Way Diverter Valve Grey.Comes complete with Body, Flange, Locking Ring, Diverter Gate and O’ring’s, Cap and O’ring, and Handle.Commonly used on Monarch and Old Signature Spas.Also available in White and Charcoal. Learn More

FloSuction 50mm (2") Safety Suction, Push Fit / Slip Fit316L Stainless Steel FasciaPVC Backing Learn More

CMP 50mm 4 Port Water Manifold (Slip/Spg)Manifold has 4 x 19mm(3/4") barbs.50mm socket at one end and a 50mm spigot at the other.Manifolds can couple into each other. Learn More

FloJet 50mm (2") Eyeball Return Jet, Push Fit / Slip Fit316L Stainless Steel FasciaPVC Backing Learn More

Spanet SV 50mm Heater Union Assy.Comes complete with O'ring, Threaded Tail, Split Nut and Screws. Learn More