Aiper Scuba E1 Cordless Robotic Pool Cleaner w/ Dual Filtration. Floor Only

Free Shipping
The Aiper Scuba E1 with Dual Filtration is among the most efficient, robust cordless robotic pool cleaners with powerful motors.
SKU:
 
AI004248610001-
Rating:
(23)

Use coupon 'BEGIN' for 10% OFF

Order now and secure free shipping with your purchase.
Qty

Satisfaction Guarantee

Satisfaction Guarantee: If you are not satisfied with a product for any reason, you are welcome to return it to us for a full refund or exchange within 30 days of the purchase date - even if you have used the product. Returns are free, and we will cover return shipping.

Pool supplies & equipment

Quality Pool & Spa Equipment

Our products have been selected because of their quality and we are confident that you will be pleased with your purchase.

Best warranties and support

Renowned Brands

We only supply products from renowned brands that offer comprehensive manufacturer's warranties and offer service and support.

Worry-free purchases

30 Days Satisfaction Guarantee

You are welcome to return any product for a refund or exchange. See terms below.

Hassle-free

Free, Easy Returns

Returns are free, there are no fees. We also make sure returns are easy to organize and processed promptly.

Satisfaction Guarantee

We stock quality pool and spa equipment and supplies from the most renowned manufacturers in Australia and the world and we are confident that you will be very pleased with your purchase. If for any reason you are not satisfied with a product, you are welcome to return it to us for a refund or exchange within 30 days of the purchase date. The refund will be issued to the full amount paid for the product including shipping.

Terms

  • You must contact us within 30 days of the date of purchase.
  • The product must be returned in good conditions.
  • Products damaged because of incorrect use, negligence or misuse will not be accepted.
  • All components, accessories and original packaging must be returned.
  • A copy of the original receipt must be included with the return.
  • Products must be shipped or returned to our Penrith NSW warehouse using a pre-paid label we will supply.

If you have any questions about our return policy, please contact us on 1300 766 619 or through our "contact us" form.

How to return a product

For more details including the steps required to return a product click here

Norton secured checkout

Same day dispatch on orders placed by 12pm AEDT

Share

Satisfaction Guarantee

All products covered

Same Day Dispatch

On orders placed by 12pm AEDT

Price Match

Quick, simple & easy

Free, Easy Returns

Hassle-free and convenient

"Above All"

Thanks to its powerful tri-motor system, the Aiper Scuba E1 with Dual Filtration is among the most efficient, most robust cordless robotic pool cleaners designed specifically for above-ground pools. The Cleaner offers up to 130 minutes of cleaning power on a swift 3-hour charge. Click and forget. Cleaning is now as simple as pressing a button and watching the cleaning happen before your eyes. Fine and ultra-fine filters work together for efficient debris collection, improving cleaning and water flow. Ideal for pools up to 100 m².

Features

  • Tri-Motor System. Two motors effortlessly propel your device across your pool, all while one motor dedicated to suction cleans up debris along the way.
    • Dedicated Wheel Motor. A specific motor powers the wheels and navigation while enhancing cleaning as the bottom brush moves in tandem with your device's wheels.
    • Dedicated Filtration Motor. A secondary motor is assigned solely to the filtration system, improving the device's ability to capture, clean, and contain dirt and debris effectively.

  • Bottom Roller Brush. The cordless cleaner for above ground pool features an electric-powered roller brush that swiftly directs debris to the filtration system.
    While other robotic pool cleaners treat every pool the same, leading to scuff marks, getting stuck in corners, or simply push dirt and debris aside, the Scuba E1 is specifically engineered with an industry first cleaning brush specifically to clean above-ground pools.
    Multiple functions of the Scuba E1 work in tandem to provide an unmatched cleaning experience. The premium silicone brush on the bottom of the device scrubs your pool floor while directing settled debris into the Scuba E1’s specially crafted filtration system. Sophistication and results that outmatch competitor class devices.

  • Dual-Filter System. Fine and ultra-fine filters work together for efficient debris collection, improving cleaning and water flow.
    • Primary Filter 180um. The primary filter with a mesh size of 180 micrometers is specifically designed to clean visible particles, effectively filtering out common debris and stains found in most pools.
    • Secondary Filter 3um. The ultra-fine filter is tailored for invisible particles, effectively filtering out common pool issues such as green algae and microorganisms.

  • One-Click Activation for Easy Usage. No complicated setup, no confusing starting process. Click and forget. Cleaning is now as simple as pressing a button and watching the cleaning happen before your eyes.
  • LED Power Indicator:
    • Blue: 51% or Greater
    • Yellow: 11%-50%
    • Red: 10% or Less
  • Bumper Protection Safeguards Your Pool and Device. The Scuba E1 doesn’t just clean, it protects your pool from unwanted wear, tear, and damage thanks to the anti-collison bumpers around the device.
  • Best Robot for All Above-ground Pools. The Scuba E1 is an unparalleled cleaning experience that provides up to 130 minutes of cleaning for above-ground pools up to 100 m² (1100 Sq.ft.)

Technical Specifications

 Aiper Scuba SEAiper Scuba E1Aiper Scuba S1Aiper Scuba S1 Pro
Pool TypeAbove groundFlat-Floored PoolsIn-groundIn-ground
Pool Size
Coverage
80 m² (860Sq.Ft)
9m (30ft) in length
100 m² (1100Sq.Ft)
10m (33ft) in length
150 m² (1600Sq.Ft)
15m (50ft) in length
200 m² (2150Sq.Ft)
20m (66ft) in length
Cleaning ModesFloor OnlyFloor + SlopeFloor/Wall/Auto/EcoFloor/Wall/Waterline/Auto/Eco
Applicable Pool SurfacesConcrete, Pebblecrete, Quartzon, Glass Beads, VinylConcrete, Pebblecrete, Quartzon, Glass Beads, Fiberglass, Vinyl, TilesConcrete, Pebblecrete, Pebblecrete with Tiled Waterline, Quartzon, Glass Beads, Fiberglass, Vinyl, TilesConcrete, Pebblecrete, Pebblecrete with Tiled Waterline, Quartzon, Glass Beads, Fiberglass, Vinyl, Tiles
Motor1 x Drive
1 x Pump
2 x Drive
1 x Pump
2 x Drive
1 x Pump
2 x Drive
2 x Pump
Scrubbing TypeSuction and 2 Bottom BrushesSuction and 1 Bottom RollerSuction and 1 Active PVC RollerSuction and Dual Active Front & Rear PVC Rollers
Suction Power Flow Rate75LPM (20GPM)227LPM (60GPM)265LPM (70GPM)379LPM (100GPM)
FilterLevel-1: 180μm Fine Filter TrayLevel-1: 180μm Fine Filter Basket
Level-2: 3μm Ultra-fine Filter
Level-1: 180μm Fine Filter Basket
Level-2: 3μm Ultra-fine Filter (optional)
Level-1: 180μm Fine Filter Basket
Level-2: 3μm Ultra-fine Filter
Filter BasketChasis Tray 2LTop Load 3.6LTop Load 3.5LTop Load 5L
Battery Life
Capacity
Up to 90 Minutes
2600 mAh
Up to 130 Minutes
7800 mAh
Up to 150 Minutes
7800 mAh
Up to 180 Minutes
7800 mAh
Charging Time3 Hours3 Hours3-4 Hours4 Hours
Vacuum Inlet Size8.8cm/3.1"14.8cm/5.8"15.5cm/6.1"15.7cm/6.2"
WavePath NavigationNoNoYesYes
Mobile AppNoNoNoOptional
Solar Charging PanelNoNoOptionalOptional
Remote ControlNoNoNoOptional
Charging DockNoNoNoOptional

In the Box

  • 1 x Aiper Scuba E1
  • 1 x DC Charger
  • 1 x User Manual
  • 1 x Retrieval Hook

Frequently Asked Questions

Can the Scuba E1 be used in pools with slopes or drains?
The Scuba E1 is made for flat-bottom pools only. It cannot operate correctly on slopes or angled surfaces and may repeatedly turn or stop if used in those areas. The device can also get stuck on drains higher than 9 mm, so drains should be closed or avoided during operation.
Why does the cleaner keep changing direction in the same spot?
This usually happens when the cleaner encounters small stones or debris it is trying to clear. It may stay in the same area until the debris is removed. Another cause is jammed trolley wheels. If the device repeats the same movements, check the wheels and clean any trapped sand or grit.
Why is the device beeping or showing a flashing red light?
A flashing red light and alarm indicate a blockage or a motor issue. Lift the cleaner out of the water and inspect the bottom roller brush, both rear wheels, and the suction area. If anything is jammed, clear it and restart the device. If the alert continues after cleaning, the motor may require service – please contact our team via the Contact Us page for assistance.
How do I properly clean and maintain the dual-filter system?
After each use, remove the filter basket, empty debris, and rinse it thoroughly. The 3-micron ultra-fine filter should be rinsed with a strong stream of water, not brushed, to avoid damage. Allow both filters to fully dry in a shaded, ventilated area before storing them to prevent mould and clogging. For deeper cleaning and to remove oils or organic build-up, you can periodically use a dedicated filter cleaner such as the Madimack Robotic Filter Cleaner to help maintain optimal performance.
Can I use the ultra-fine filter all the time, or only in certain situations?
The ultra-fine filter captures particles as small as 3 microns and is best used when water appears cloudy or contains fine dust, algae, or microorganisms. If your pool water is already clear, the standard 180-micron filter is enough. Using the ultra-fine filter when the pool has a lot of stones, leaves, or heavy debris can cause frequent clogging, so use it only when needed.
What if the cleaner gets stuck on debris, stones, or uneven surfaces?
If the cleaner is stuck on a raised area, heavy debris, or a low drain, lift it using the hook and reposition it. Sticking can also occur if the roller brush or wheels are jammed—check and clean these components before restarting the cycle. The device works best on smooth, flat surfaces without obstructions.
Can I use the Scuba E1 after shocking the pool?
You should wait until chlorine levels drop back below 4 ppm before using the cleaner. Running it during high chlorine levels can affect performance and long-term durability.
What should I do if the device doesn’t start or shuts off immediately?
First, check whether the device detects water. The Scuba E1 performs short pump tests when turned on; if it cannot detect water, it will shut down automatically. Make sure it is fully submerged and reaches the pool floor. If it still won’t start, inspect the brush and wheels for obstructions, then recharge the device.
Why does the Scuba E1 stop mid-cycle or fail to cover the whole pool?
This can happen if the filter is clogged, the wheels are jammed, or the battery is low. Clean both filters, check the roller brush and wheels, and inspect the pool for areas where the cleaner might get obstructed. Very uneven surfaces or raised drains may also interrupt the cleaning pattern.
Why isn’t the water draining properly when I remove the cleaner from the pool?
The device must be tilted slightly by the handle so trapped water can exit through the drainage openings. If water drains slowly, check the filter basket and pump area for debris blocking the flow.
What should I check before charging, and how do I avoid charging issues?
Ensure the charging port is completely dry before plugging in the cable. Any water inside the port can prevent charging or trigger safety shutdown. Use only the supplied charger and keep the device out of direct sunlight while charging.
Why does the cleaner fail to detect water and shut down?
When first turned on, the cleaner tests for water by briefly activating its pump. If this test fails, the device assumes it is not in the pool and shuts off. This may happen if the device is not fully submerged, if air is trapped in the filtration chamber, or if the pump intake is blocked. Lower the cleaner slowly into the water, allow air bubbles to escape, and check that the bottom roller brush and suction inlet are clear.

Note!
Differences between Product Illustrations and Actual Products: The product illustrations (including product pictures, images and display contents) displayed on the website are for reference and illustrative purpose only. The actual products received by each customer may vary and differ slightly with the product illustrations in the aspects including but not limited to appearance, color, logo, dimension and size due to production batches, improvements, legal and regulatory requirements, country or region or other reasons. Please refer to the acutual products received. The final interpretation of product specifications and appearance belongs to Aiper.

SKU AI004248610001-
GTIN 6975140316356
Barcode 253287
Package Length 56
Package Width 38
Package Height 26
Warranty 1 Year
Brand Aiper
Model Scuba E1
Product Type Robotic Pool Cleaner
Shipping Type Standard
Cleaner Type Robotic Cleaner
Suitable Pool Type Above Ground
Cable length (metres) Cable Free
Swivel No
Maximum Pool Size up to 100m2
Suitable Pool Surface Concrete, Pebblecrete, Quartzon, Glass Beads, Fibreglass, Vinyl Lined, Tiled
Leaf Handling Capacity Moderate Amounts
Leaf Size Capability Medium
Type Of Debris Medium (Nuts, Twigs, etc.)
Cleaning Cycle Floor Only
Can Handle Sand Yes
Can Handle Fine Dust Yes
Caddy No
Filter Capacity 3.6L
Filtration Type Canister
Filtration Porosity 180μm Fine Filter Basket + 3μm Ultra-fine Filter
Wall Climber No
Cleaning Area Floor
Remote Control No
Energy Consumption 38W
Bluetooth No
Smart Phone Control No

Shipping

Same-day dispatch applies to orders received by 12.00 pm (AEST) during business days. Orders received after 12.00 pm and on weekends or public holidays will be dispatched on the next business day.

Delivery fees are $19.95 flat-rate per order Australia-wide, no matter how many products are in it. Orders containing bulky items like sand filters, acoustic boxes, heat pumps, pool covers, and pool slides may incur additional fees as they require specialized carriers.

Below are the estimated time to arrival in business days once an order is shipped.

Destination Sydney NSW VIC QLD SA WA/NT
Business Days 1 - 2 2 - 4 2 - 4 2 - 4 3 - 4 5 - 6

Rural and remote addresses, where delivery is not provided every day, may take longer.

Returns

Satisfaction Guarantee: If you are not satisfied with a product for any reason, you are welcome to return it to us for a full refund or exchange within 30 days of the purchase date - even if you have used the product. Returns are free, and we will cover return shipping.

We take full responsibility for the safe arrival of the products that you order from us. We will replace at our expense any product that arrives faulty, damaged during transit, or is the incorrect product. Click here for details

If you have any questions about our shipping policy or our return policy, please contact us on 1300 766 619 or through our contact us form.