Aiper Scuba SE Cordless Robotic Pool Cleaner. Floor Only
In stock
Order now while supplies last!
Satisfaction Guarantee
All products covered
Same Day Dispatch
On orders placed by 12pm AEDT
Price Match
Quick, simple & easy
Secure Shipping with Tracking
Guaranteed to arrive safely
Flat rate shipping
Per order Australia-wide
Free, Easy Returns
Hassle-free and convenient
Customer Service & Support
Dedicated call center
"Easy in Every Way"
Cordless and lightweight at just 3.4 kg, this Aiper Scuba SE (Dark Gray) cleaner offers up to 90 minutes of cleaning power on a swift 3-hour charge. One-click activation lets you enjoy your weekend with a clean pool awaiting, while auto-parking and an intuitive audio alert system keeps things simple. Ditch bags for a nylon filter tray, making debris collection a breeze. Ideal for pools up to 80 m².
Key Features
- Cordless and Easy to Use. Ditch the cord, and enjoy portability. The Scuba SE is completely cordless, making it lighter, more portable, and easier to store.
- Hydro Dynamic Design Enhances Performance. The Scuba SE’s hydrodynamic design allows the device to flow through your pool as it propels across the pool floor picking up dirt and debris. The design allows the Scuba SE to use less power in propulsion and dedicate that power to its cleaning capabilities. While other bulky corded cleaners consume additional power to simply move, the Scuba SE is designed to utilize its maximum potential to clean your pool's floor and continue cleaning for a full 90 minutes.
- Powerful Motor. The Scuba SE’s dual-drive motors generate up to 20 GPM (75 LPM) of suction and filtration. With more power and more filtration, your pool will be cleaner, faster. To store all the debris from even the toughest cleaning jobs, the Scuba SE is equipped with a two-liter filter box that stores everything collected by your pool cleaner.
- Energy Efficient. 90 minutes of cleaning on only a three hour charge.
- Cleaning Performance. This small but mighty pool cleaner is an aquatic workhorse, cleaning for up to 90 minutes and providing maximum coverage of your pool floor. A fantastic value for pools of up to 80 m2.
- One-Click Activation. Hate doing chores? Aiper understands, and they designed the Scuba SE to make cleaning effortless. With its sleek, simple one-click activation, just turn it on, place it in your pool, and witness cleaning perfection in action.
- Audio Alert System. The easy-to-understand audio alters ensure Scuba SE owners will always know the status of their device, no matter what.
- Low Battery Alert. The device docks by the pool edge, with the buzzer beeping intermittently. Beeps for 5 mins (beep for 2s intermittently).
- Stuck Impeller Alert. The buzzer beeps intermittently. Beeps for 5 min (beep for 1s intermittently).
- Water Damage Alert. The buzzer beeps intermittently. Beeps for 5 min (beep for 5s intermittently).
- Auto-Parking. There's no need to dive in to retrieve a dead device. The Scuba SE offers simplicity and convenience with its auto-parking feature. When it's done cleaning or the battery is low, the Scuba SE automatically parks near the pool's edge, ensuring easy retrieval without getting wet.
- Quick Drainage. The Scuba SE features an enhanced water purging system, efficiently draining 80% of stored water within 15 seconds. This makes retrieving and storing the device easier than ever, saving you time and effort while reducing maintenance.
- Easy to Clean
- Easy to Assemble
- Recommended Pool Size - This unit is ideal for pools up to 80 m².
Technical Specifications
| Aiper Scuba SE | Aiper Scuba E1 | Aiper Scuba S1 | Aiper Scuba S1 Pro | |
| Pool Type | Above ground | Flat-Floored Pools | In-ground | In-ground |
| Pool Size Coverage | 80 m² (860Sq.Ft) 9m (30ft) in length | 100 m² (1100Sq.Ft) 10m (33ft) in length | 150 m² (1600Sq.Ft) 15m (50ft) in length | 200 m² (2150Sq.Ft) 20m (66ft) in length |
| Cleaning Modes | Floor Only | Floor + Slope | Floor/Wall/Auto/Eco | Floor/Wall/Waterline/Auto/Eco |
| Applicable Pool Surfaces | Concrete, Pebblecrete, Quartzon, Glass Beads, Vinyl | Concrete, Pebblecrete, Quartzon, Glass Beads, Fiberglass, Vinyl, Tiles | Concrete, Pebblecrete, Pebblecrete with Tiled Waterline, Quartzon, Glass Beads, Fiberglass, Vinyl, Tiles | Concrete, Pebblecrete, Pebblecrete with Tiled Waterline, Quartzon, Glass Beads, Fiberglass, Vinyl, Tiles |
| Motor | 1 x Drive 1 x Pump | 2 x Drive 1 x Pump | 2 x Drive 1 x Pump | 2 x Drive 2 x Pump |
| Scrubbing Type | Suction and 2 Bottom Brushes | Suction and 1 Bottom Roller | Suction and 1 Active PVC Roller | Suction and Dual Active Front & Rear PVC Rollers |
| Suction Power Flow Rate | 75LPM (20GPM) | 227LPM (60GPM) | 265LPM (70GPM) | 379LPM (100GPM) |
| Filter | Level-1: 180μm Fine Filter Tray | Level-1: 180μm Fine Filter Basket Level-2: 3μm Ultra-fine Filter | Level-1: 180μm Fine Filter Basket Level-2: 3μm Ultra-fine Filter (optional) | Level-1: 180μm Fine Filter Basket Level-2: 3μm Ultra-fine Filter |
| Filter Basket | Chasis Tray 2L | Top Load 3.6L | Top Load 3.5L | Top Load 5L |
| Battery Life Capacity | Up to 90 Minutes 2600 mAh | Up to 130 Minutes 7800 mAh | Up to 150 Minutes 7800 mAh | Up to 180 Minutes 7800 mAh |
| Charging Time | 3 Hours | 3 Hours | 3-4 Hours | 4 Hours |
| Vacuum Inlet Size | 8.8cm/3.1" | 14.8cm/5.8" | 15.5cm/6.1" | 15.7cm/6.2" |
| WavePath Navigation | No | No | Yes | Yes |
| Mobile App | No | No | No | Optional |
| Solar Charging Panel | No | No | Optional | Optional |
| Remote Control | No | No | No | Optional |
| Charging Dock | No | No | No | Optional |
In the Box
- 1 x Aiper Scuba SE
- 1 x Charger
- 1 x User Manual
- 1 x Retrieval Hook
- 2 x Brushes
Frequently Asked Questions
What should I do if the cleaner doesn’t start when placed in the water?
- Make sure it’s fully charged – the charger light should be green before use (red means it’s still charging).
- Press the power button until you hear a beep, then place the cleaner straight into the water within about 30 seconds.
- Check that the charging port cover is fully closed and the unit is the right way up.
- Confirm the pool meets the operating requirements: flat floor, depth 0.5–3 m, size up to 80 m².
- Remove the cleaner, rinse the filter tray and bottom inlets to clear any blockages, turn it off, then on again and re-submerge.
Why is my Scuba SE beeping and parking at the pool edge?
- Low battery: the cleaner will drive to the nearest wall or pool edge and stop, with intermittent beeps (about 2 seconds on/off for several minutes). Lift it out, turn it off, clean the filter tray and put it on charge.
- Other alerts: different beep patterns can indicate a stuck impeller or water-damage alert. If you suspect this, remove the cleaner, check for blockages or visible leaks and do not continue using it until the issue is resolved.
Can the Scuba SE be used while the pool pump or filter system is running?
Is it safe to leave the cleaner in the pool after it finishes its cycle?
- When you hear the beeping or see it parked at the wall, remove it using the hook or handle.
- Turn it off, open the top shell, empty and rinse the filter tray and chassis, then allow excess water to drain.
- Let the unit dry in the shade before charging or storing.
- Always remove the cleaner before swimming, shocking the pool, or adding large doses of chemicals.
What are the correct water chemistry limits for using the Scuba SE?
- Water temperature: 10–35 °C (50–95 °F)
- pH: 7.0–7.4
- Free chlorine: up to 4 ppm
- Salt (NaCl): up to 5,000 ppm
What should I check if the cleaner isn’t collecting debris effectively?
- Filter tray: open the latches, lift off the top shell and remove the filter tray. Rinse it thoroughly from the outside in so debris doesn’t dry and block the mesh.
- Suction inlets: check the openings on the underside for leaves, twigs, or toys caught in them.
- Brushes: make sure both bottom brushes are installed, not worn flat or missing; you should hear a click when they lock in.
- Pool conditions: very fine dust or silt may need extra help from your main filtration system or a manual vacuum.
- Pool size: confirm the pool is within the 80 m² size limit. Larger pools may need two cycles or repositioning the cleaner between runs.
How often should I clean the filter tray?
- Remove the tray, rinse it thoroughly with clean water and flush debris from the mesh.
- Rinse the inside of the chassis and pump inlet to remove any sand or grit.
- Allow excess water to drain before reassembling.
How do I properly store the cleaner for long periods?
- Rinse the cleaner and filter tray thoroughly and let everything dry completely.
- Store the unit in a cool, dry, well-ventilated area out of direct sunlight and away from heat sources.
- Do not leave the cleaner sitting in pool water or outdoors exposed to weather.
- For storage longer than a few weeks, charge the battery to about 40–60% and top it up every 3 months using the original Aiper charger.
Can the Scuba SE operate in saltwater pools, and what is the maximum salt level?
- Maximum salt level (NaCl): 5,000 ppm.
Why is the cleaner not moving or moving very slowly on the pool floor?
- Low battery: if the charge is nearly exhausted, the cleaner may slow down before parking at the edge. Fully recharge before the next use.
- Clogged filter or inlet: a blocked tray restricts flow and reduces propulsion. Remove and rinse the tray and inlets thoroughly.
- Debris in brushes or wheels: hair or string wrapped around the wheels/brushes can drag. Inspect the wheel assemblies and brush bars and remove any tangles.
- Pool surface or slope: the Scuba SE is meant for flat-floored pools. Steep slopes, wrinkles in liners or rough steps can slow or stall the unit.
- Water conditions: very cold water or heavy scale/algae can affect traction and performance.
Can I use the Scuba SE in very cold or very warm water?
- Below about 10 °C, the water is too cold for the seals and battery, and performance may drop sharply.
- Above 35 °C, the motor and battery can overheat and may be damaged.
Why does the cleaner not sink or take a long time to start moving?
- After pressing the power button and hearing the beep, submerge the cleaner slowly and tilt it to each side to release trapped air from the casing.
- Make sure it is fully underwater and sitting flat on the pool floor before you let go.
- Check that the filter tray and top shell are correctly seated, as mis-assembly can trap air or affect balance.
- Ensure the water depth is at least 0.5 m and that you are not placing the unit on steps or very shallow shelves.
Note!
Differences between Product Illustrations and Actual Products: The product illustrations (including product pictures, images and display contents) displayed on the website are for reference and illustrative purpose only. The actual products received by each customer may vary and differ slightly with the product illustrations in the aspects including but not limited to appearance, color, logo, dimension and size due to production batches, improvements, legal and regulatory requirements, country or region or other reasons. Please refer to the acutual products received. The final interpretation of product specifications and appearance belongs to Aiper.
| SKU | AI004286610001 |
|---|---|
| GTIN | 6975140316394 |
| Barcode | 253292 |
| Package Length | 33 cm |
| Package Width | 28 cm |
| Package Height | 17 cm |
| Warranty | 1 Year |
| Brand | Aiper |
| Model | Scuba SE |
| Product Type | Robotic Pool Cleaner |
| Shipping Type | Standard |
| Cleaner Type | Robotic Cleaner |
| Suitable Pool Type | Above Ground |
| Cable length (metres) | Cable Free |
| Swivel | No |
| Maximum Pool Size | up to 80m2 |
| Suitable Pool Surface | Concrete, Pebblecrete, Quartzon, Glass Beads, Vinyl Lined |
| Leaf Handling Capacity | Moderate Amounts |
| Leaf Size Capability | Medium |
| Type Of Debris | Medium (Nuts, Twigs, etc.) |
| Cleaning Cycle | Floor Only |
| Can Handle Sand | Yes |
| Can Handle Fine Dust | Yes |
| Caddy | No |
| Filter Capacity | 2L |
| Filtration Type | Nylon Holding Tray |
| Filtration Porosity | 180μm (microns) Fine Filter Tray |
| Weight | 3.4 Kg |
| Wall Climber | No |
| Cleaning Area | Floor |
| Remote Control | No |
| Energy Consumption | 30W |
| Bluetooth | No |
| Smart Phone Control | No |
Shipping
Same-day dispatch applies to orders received by 12.00 pm (AEST) during business days. Orders received after 12.00 pm and on weekends or public holidays will be dispatched on the next business day.
Delivery fees are $19.95 flat-rate per order Australia-wide, no matter how many products are in it. Orders containing bulky items like sand filters, acoustic boxes, heat pumps, pool covers, and pool slides may incur additional fees as they require specialized carriers.
Below are the estimated time to arrival in business days once an order is shipped.
| Destination | Sydney | NSW | VIC | QLD | SA | WA/NT |
|---|---|---|---|---|---|---|
| Business Days | 1 - 2 | 2 - 4 | 2 - 4 | 2 - 4 | 3 - 4 | 5 - 6 |
Rural and remote addresses, where delivery is not provided every day, may take longer.
Returns
Satisfaction Guarantee: If you are not satisfied with a product for any reason, you are welcome to return it to us for a full refund or exchange within 30 days of the purchase date - even if you have used the product. Returns are free, and we will cover return shipping.
We take full responsibility for the safe arrival of the products that you order from us. We will replace at our expense any product that arrives faulty, damaged during transit, or is the incorrect product. Click here for details
If you have any questions about our shipping policy or our return policy, please contact us on 1300 766 619 or through our contact us form.