Filter Pump

…and a "fast no-mess" alternative to conventional chemical treatments. Just drop one into the pump or skimmer basket and watch the sparkle return to the water. The perfect additive for sand filters. Benefits: Clears cloudy water Reduces chlorine consumption Ideal for either salt or chlorine pools…

Eliminates floating insects from the pool surface by reducing surface tension, without affecting water balance or sanitiser performance.

Calcium hardness increaser for balanced pool water, helping protect pool surfaces and equipment from corrosive low-hardness conditions.

Pre-measured slow-release cyanuric-acid tablets that protect chlorine from sunlight, helping reduce UV loss and support longer-lasting sanitiser performance.

Fast-acting chlorine and bromine neutraliser that helps quickly lower sanitiser levels in pools and spas without affecting other water balance parameters.

…all recognised pool equipment, such as heaters and pumps, which are associated with manufacturers’ warranties It allows a pool to be balanced according to builders’ recommendations. It is non-foaming meaning that it will not block filters, not leave a mess on the pool walls, not cause the heater…

…the build-up of an unsightly scum line Help stop the occurrence of foaming which is generally caused by body fats Enhance the filtration cycle and increase time between backwashes Help reduce your pump running time Collect fine particles of suspended matter making it easy for the filter to remove

Automated pH dosing system for balanced pool water.

Helps reduce pool water evaporation and heat loss by forming an invisible liquid barrier, supporting warmer water, lower water loss, and more efficient pool operation with simple monthly dosing.

Chemical cleaner for cartridge, sand, glass and D.

Fast-dissolving cyanuric-acid stabiliser that shields chlorine from sunlight, reducing UV loss and helping sanitiser remain effective for longer.

Gecko K-72 8 button overlay(old style).Used with MSpa controllers on LA Spas.Overlay is suited for 2 pump system.Overlay has the following buttons:Clock, Jets1, Jets2, Light, Econ, Filter, Up and Down.

Gecko K-72 9 button overlay(old style).Used with MSpa controllers on LA Spas.Overlay is suited for 3 pump system.Overlay has the following buttons:Clock, Jets1, Jets2, Jets3, Light, Econ, Filter, Up and Down.

Removes and controls dissolved metals to reduce staining and scale in pools and spas.

…1,000 litres of water. Pour Iluka Bliss around the perimeter with the pump and filter operating then run the circulation pump for one cycle. Weekly: Add ILUKA bliss Add ILUKA seachange Check your Total Hardness levels – add ILUKA hardup as required  Clean your filter cartridge using ILUKA klenz

Long-lasting silicone lubricant that protects O-rings, seals and plastic parts from wear, moisture and sticking.

…Cause: This indicates no flow in the system. Remedy: Check the following: Ensure the pool pump is turned on. Open any closed valves. Check for air in the system and inspect O-rings. Clean or backwash the filter if it’s dirty. Ensure the water level is adequate and fill the pool if needed. Clean the…

…all recognised pool equipment, such as heaters and pumps, which are associated with manufacturers’ warranties It allows a pool to be balanced according to builders’ recommendations. It is non-foaming meaning that it will not block filters, not leave a mess on the pool walls, not cause the heater…

Chlorine-free shock treatment that oxidises contaminants, reduces combined chlorine, supports sanitiser efficiency and helps restore sparkle to spa water.

…Mini 1 230volt Output Sockets: PUMP 1: Circ Pump, 1Spd Pump or 2Spd Pump(the pump on this outlet must be pushing water through the heater) AUX: 1Spd Pump or Blower 230V: This outlet has a constant 230volts and is not switchable (can be used to power a heat pump or any other item requiring a constant…

Effectively increases pH and Total Alkalinity in spa water, helping bring balance back to the correct level.

Controls scale formation and softens existing calcium deposits to help reduce staining, protect pool surfaces, and improve salt chlorinator performance.

Chlorine-free shock treatment that oxidises contaminants, reduces combined chlorine, supports sanitiser efficiency and helps restore sparkle to spa water.