Pool Pump And Filter

…kg 60/45 kg 105/60 kg Max Pressure 400kPa How It Works The INSNRG Mi 250 filters pool water using 125 kg of 16/30 grade sand or 60 kg fine and 45 kg coarse glass media (not included). Pool water, laden with dirt, is pumped through the 40mm multiport valve and distributed over the media bed, where… Learn More

…kg 60/45 kg 105/60 kg Max Pressure 400kPa How It Works The INSNRG Mi 320 filters pool water using 125 kg of 16/30 grade sand or 60 kg fine and 45 kg coarse glass media (not included). Pool water, laden with dirt, is pumped through the 50mm multiport valve and distributed over the media bed, where… Learn More

…kg 60/45 kg 105/60 kg Max Pressure 400kPa How It Works The INSNRG Mi 350 filters pool water using 185 kg of 16/30 grade sand or 105 kg fine and 60 kg coarse glass media (not included). Pool water, laden with dirt, is pumped through the 50mm multiport valve and distributed over the media bed, where… Learn More

…175–200 kg of salt for a 50,000 L pool. When adding salt, pour into the pool and brush in; run the chlorinator and filter pump while dissolving, and never pour salt into the skimmer box. Install cell vertically Do not install side on Do not install upside down Pool Chemistry Guidelines For optimal… Learn More

…192.5–220 kg of salt for a 55,000 L pool. When adding salt, pour into the pool and brush in; run the chlorinator and filter pump while dissolving, and never pour salt into the skimmer box. Install cell vertically Do not install side on Do not install upside down Pool Chemistry Guidelines For optimal… Learn More

…280–320 kg of salt for an 80,000 L pool. When adding salt, pour into the pool and brush in; run the chlorinator and filter pump while dissolving, and never pour salt into the skimmer box. Install cell vertically Do not install side on Do not install upside down Pool Chemistry Guidelines For optimal… Learn More

…most pools are filtered for around 8 hours per day, additional run times are often needed to maintain the desired water temperature. The AquaSolis heat pump includes a ‘Demand Heat’ function that works with the DT-H5RO-I controller. When heating is required, the controller overrides the filter pump… Learn More

…most pools are filtered for around 8 hours per day, additional run times are often needed to maintain the desired water temperature. The AquaSolis heat pump includes a ‘Demand Heat’ function that works with the DT-H5RO-I controller. When heating is required, the controller overrides the filter pump… Learn More

…most pools are filtered for around 8 hours per day, additional run times are often needed to maintain the desired water temperature. The AquaSolis heat pump includes a ‘Demand Heat’ function that works with the DT-H5RO-I controller. When heating is required, the controller overrides the filter pump… Learn More

…most pools are filtered for around 8 hours per day, additional run times are often needed to maintain the desired water temperature. The AquaSolis heat pump includes a ‘Demand Heat’ function that works with the DT-H5RO-I controller. When heating is required, the controller overrides the filter pump… Learn More

…most pools are filtered for around 8 hours per day, additional run times are often needed to maintain the desired water temperature. The AquaSolis heat pump includes a ‘Demand Heat’ function that works with the DT-H5RO-I controller. When heating is required, the controller overrides the filter pump… Learn More

…the sensors. Important Notes Before Installation: Pool water must be chemically balanced before sensor calibration: pH: 7.2 – 7.6 Total Alkalinity: 80 – 120 ppm Calcium Hardness: 180 – 250 ppm If used alongside a chlorine (ORP) sensor, allow at least 45 minutes of pump run time before calibration. Learn More